Flush Cutters - Xcelite

These are simple flush cutters from Excelite that give you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are good, but if you really need to get up close and personal, flush cutters are the way to go! Each pair of these cutters has a 3/4in (1.9 cm) jaw length and are 5 inches (12.7 cm) in overall length. This tool flush cuts soft wire up to 20 AWG (0.8mm) and is ESD safe.

Note: To make sure that these flush cutters ship safely, there has been an extra amount of grease applied to the center joint. Repeatedly opening and closing the cutters will help extend the length they open.