Description: The Electrically Isolated USB EZO™ Carrier Board allows you to connect your Atlas Scientific circuit directly to your computer or Raspberry Pi. Built-in isolation ensures that your circuit will be protected from interference, ground loops and harmful voltages. Simply attach an Atlas Scientific EZO-type module to the top of the carrier board, plug in your USB and BNC cables, and you’re all set!
Each board comes equipped with two 1x3 headers to plug in your EZO circuit, a BNC adapter to attach your desired sensor probe, a USB mini B connector to hook a cable to your computer, and three pins to connect a Flow Connector Board (R, W, B). The EZO Carrier Board requires 5V at 31mA to operate.
Note: This Carrier Board does NOT come with any EZO class devices. They can, however, be found in one of our many Atlas Scientific kits!
Resistors are a good thing, in fact, they're actually crucial in a lot of circuit...
These are 6" long jumper wires with female connectors on both ends. Use these to...
These are 6" long jumper wires with male connectors on both ends. Use these to...
A row of headers - break to fit. 40 pins that can be cut to...