Elmwood no more, long live Elmwood! Elmwood Electronics and PiShop are now together!
Please order via PiShop.ca, as we are no longer taking orders through this site.
More details are in our blog!

Small Stepper Motor

ROB-10551

Elmwood Electronics has stopped accepting orders. This product might be available at PiShop.ca. Please check this blog post about our recent team merger.

These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern.

When using a current limiting driver such as the Easydriver or Big Easydriver, a 12 volt power supply can be used as long as you adjust the current level to 400mA or less. If using a non current limited driver (like a L293D or an H-bridge) you will need to lower your input voltage to keep the motor current below 400mA.

This is a Bipolar motor.

Features:

  • Stride Angle (degrees) : 7.5
  • 2-Phase
  • Rated Voltage : 12V
  • Rated Current : 400mA
  • 3mm Diameter Drive Shaft
  • 4-Wire Cable Attached
  • In-traction Torque : 100 g/cm

Documents: