{"title":"Raspberry Pi","description":"We offer the best selection of Raspberry Pi product and accessories in Canada, along with knowledgable customer service and fast, inexpensive shipping!","products":[{"product_id":"adafruit-16-channel-pwm-servo-hat-for-raspberry-pi-mini-kit","title":"Adafruit 16-Channel PWM \/ Servo HAT for Raspberry Pi - Mini Kit","description":"\u003cp\u003eThe Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor use with Raspberry Pi Model A+, B+\u003c\/strong\u003e\u003cstrong\u003e, or Pi 2\u003c\/strong\u003e \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/gpio-header-for-raspberry-pi-extra-tall-2x13-female-header\"\u003ecan be used with the Model A or B if you use a tall 2x13 header\u003c\/a\u003e instead of the included 2x20.\u003c\/p\u003e\n\u003cp\u003eThe Adafruit 16-Channel 12-bit PWM\/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins!\u003c\/p\u003e\n\u003cp\u003eWorks with any servo that can be powered by 5V and take 3.3V logic level signals.\u003c\/p\u003e\n\u003cp\u003eBest of all, we even have a Python library you can use, so you'll be up and running instantly, to make your robotic creation com to life. The Adafruit PWM\/Servo HAT is the perfect solution for any project that requires a lot of servos or PWM outputs! \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi\/\"\u003ePlease check out our detailed tutorial for lots more information including diagrams, schematics, installation instructions and more\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach order comes with a Servo HAT, a 2-pin terminal block, four 3x4 headers and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but its easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. If you would like to stack multiple HATs onto one Pi, you can also pick up a 2x20 stacking header and a set of right-angle 3x4 headers that should be soldered on instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note!\u003c\/strong\u003e \u003cstrong\u003eThis kit does not come with Raspberry Pi, servos, or required 5V power supply.\u003c\/strong\u003e \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi\/powering-servos\"\u003eWe have recommendations on the required 5-6V power supply on the tutorial page\u003c\/a\u003e, and \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=Servos\"\u003ea whole bunch of servo options\u003c\/a\u003e in the Adafruit shop, any 3-pin classic DC hobby servo will work.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe class=\"ta-insert-video\" src=\"https:\/\/www.youtube.com\/embed\/6fzHTwYVKrc\" width=\"560\" height=\"315\" ta-insert-video=\"https:\/\/www.youtube.com\/embed\/6fzHTwYVKrc\" allowfullscreen=\"true\" frameborder=\"0\" contenteditable=\"false\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-heading-row\"\u003e\n\u003ch2 id=\"tab-technical-details-heading\"\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions w\/ components: 65mm x 56mm x 13mm \/ 2.6\" x 2.2\" x 0.5\"\u003c\/li\u003e\n\u003cli\u003eWeight (unsoldered HAT only): 14g \/ 0.03 lbs.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi\/downloads\" target=\"\"\u003eDatasheet, schematic, PCB files, and Fritzing object available from the product tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0215\/6458\/files\/RoHS2_2011_65_EU_480x480.png?v=1580746141\" alt=\"\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0215\/6458\/files\/RoHS2_2015_863_EU_480x480.png?v=1580746153\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0215\/6458\/files\/RoHS2_2015_863_EU_480x480.png?v=1580746153\" data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7380580419,"sku":"2327","price":22.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2327-07.gif?v=1442511937"},{"product_id":"adafruit-dc-stepper-motor-hat-for-raspberry-pi-mini-kit","title":"Adafruit DC \u0026 Stepper Motor HAT for Raspberry Pi - Mini Kit","description":"\u003cp\u003eLet your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and motors are not included.\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e Since the Raspberry Pi does not have a lot of PWM pins, we use a\u003cspan style=\"color: #000000; font-family: 'Gotham SSm A', 'Gotham SSm B', Arial, Helvetica, sans-serif; font-size: 14px; line-height: 20px;\"\u003e \u003c\/span\u003e\u003cstrong\u003efully-dedicated PWM driver chip\u003c\/strong\u003e\u003cstrong style=\"color: #000000; font-family: 'Gotham SSm A', 'Gotham SSm B', Arial, Helvetica, sans-serif; font-size: 14px; line-height: 20px;\"\u003e \u003c\/strong\u003eonboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA \u0026amp; SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.\u003c\/p\u003e\n\u003cp\u003eIn fact, \u003cstrong\u003eyou can even stack multiple Motor HATs\u003c\/strong\u003e, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include.\u003c\/p\u003e\n\u003cp\u003eMotors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time)\u003cstrong style=\"color: #000000; font-family: 'Gotham SSm A', 'Gotham SSm B', Arial, Helvetica, sans-serif; font-size: 14px; line-height: 20px;\"\u003e, \u003c\/strong\u003ea big improvement over L293D drivers and there are built-in flyback diodes as well.\u003c\/p\u003e\n\u003cp\u003eThere was even a little space, so Adafruit added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks.\u003c\/p\u003e\n\u003cp\u003eLets check out these specs again:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 H-Bridges: TB6612 chipset provides \u003cstrong\u003e1.2A per bridge\u003c\/strong\u003e with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 4 bi-directional DC\u003c\/strong\u003e motors with individual 8-bit speed selection (so, about 0.5% resolution)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 2 stepper motors\u003c\/strong\u003e (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.\u003c\/li\u003e\n\u003cli\u003eBig terminal block connectors to easily hook up wires (18-26AWG) and power\u003c\/li\u003e\n\u003cli\u003ePolarity protected 2-pin terminal block and jumper to connect external 5-12VDC power\u003c\/li\u003e\n\u003cli\u003eWorks best with Raspberry Pi 4, the Pi 3 model A+, B+, or Pi 2, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/gpio-header-for-raspberry-pi-extra-tall-2x13-female-header\"\u003ebut can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstall the easy-to-use Python library, check out the examples and you're ready to go!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComes with an assembled \u0026amp; tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers on. \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2223\"\u003eStacking header not included, but we sell them in the shop so if you want to stack HATs, please pick one up at the same time.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, motors, and battery pack are not included\u003c\/strong\u003e but we have lots of motors in the shop and all our DC motors, and stepper motors work great. \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi\" target=\"_blank\"\u003eCheck out this detailed tutorial for tons of info including schematics, wiring diagrams, python libraries and example walkthroughs.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions w\/ components: 65mm x 56mm x 13mm \/ 2.6\" x 2.2\" x 0.5\"\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-dc-and-stepper-motor-hat-for-raspberry-pi\/downloads\"\u003eDatasheets, schematic, PCB files, and Fritzing available in the product tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0215\/6458\/files\/RoHS2_2011_65_EU_480x480.png?v=1580746141\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0215\/6458\/files\/RoHS2_2011_65_EU_480x480.png?v=1580746141\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0215\/6458\/files\/RoHS2_2015_863_EU_480x480.png?v=1580746153\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0215\/6458\/files\/RoHS2_2015_863_EU_480x480.png?v=1580746153\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7380582915,"sku":"2348","price":29.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2348-01.jpeg?v=1442511953"},{"product_id":"raspberry-pi-2-amp-micro-usb-power-supply","title":"Raspberry Pi 2.5 Amp Micro USB Power Supply","description":"\u003cp\u003eThis beefy 2.5 amp power supply is the recommended for most Raspberry Pi models*. Perfect for your Raspberry Pi or any device with a micro USB connector.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cem\u003e*Not compatible with the Raspberry Pi 4B.\u003c\/em\u003e\u003c\/p\u003e","brand":"Elmwood Electronics","offers":[{"title":"2.5A","offer_id":7380596291,"sku":"5200","price":11.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/photo_1_1_2b67f0ac-ad08-4e81-9a71-792497763c2f.jpeg?v=1442512065"},{"product_id":"raspberry-pi-usb-to-serial-ttl-console-debug-cable","title":"Raspberry Pi USB to serial TTL console\/debug cable","description":"\u003cp\u003eThe cable is easiest way ever to connect to your microcontroller\/Raspberry Pi\/WiFi router serial console port. Inside the big USB plug is a USB\u0026lt;-\u0026gt;Serial conversion chip and at the end of the 36\" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX\/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.\u003cbr\u003e \u003cbr\u003e Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug\/login console on the Raspberry Pi or BeagleBone Black. Connect the pins as shown to power the Pi or BBB and establish the RX\/TX link. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you are running Windows 7\/8\/10 etc,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruits-raspberry-pi-lesson-5-using-a-console-cable\/software-installation-windows\"\u003echeck this tutorial page with links to drivers for both PL2303 and CP2102\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf you are running Mac OS X,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruits-raspberry-pi-lesson-5-using-a-console-cable\/software-installation-mac\"\u003echeck this tutorial page with links to drivers for both PL2303 and CP2012\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf you are running Linux, drivers are already included in the kernel, no need to install anything!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e \u003cbr\u003e Also handy for hacking WiFi routers to install alternate OS's, or nearly any other 3.3V logic serial port. This is easier to use than an FTDI cable in many cases because the wires are separated. Note that we call this a \"TTL cable\" (since that's what they're called) but technically it's CMOS logic.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eThis cable is not good for Arduino re-programming\u003c\/b\u003e such as a Boarduino, MENTA, Monochron, etc. because it does not have the DTR\/RTS wire necessary for initiating the bootloader reboot sequence. For that we suggest an FTDI cable or FTDI friend.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg \"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eThere are four wires: red power, black ground, white RX into USB port, and green TX out of the USB port.\u003c\/p\u003e\n\u003cp\u003eThe power pin provides the 5V @ 500mA direct from the USB port and the RX\/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you are running Windows 7\/8\/10 etc,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruits-raspberry-pi-lesson-5-using-a-console-cable\/software-installation-windows\"\u003echeck this tutorial page with links to drivers for both PL2303 and CP2102\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf you are running Mac OS X,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruits-raspberry-pi-lesson-5-using-a-console-cable\/software-installation-mac\"\u003echeck this tutorial page with links to drivers for both PL2303 and CP2012\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIf you are running Linux, drivers are already included in the kernel, no need to install anything!\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/PL2303HX.pdf\"\u003ePL2303HX.D datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/datasheets\/DS_PL2303TA_d20120504.pdf\"\u003ePL2303TA datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.silabs.com\/Support%20Documents\/TechnicalDocs\/an197.pdf\"\u003eCP210X Serial Communication Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.silabs.com\/products\/mcu\/pages\/usbtouartbridgevcpdrivers.aspx\"\u003eSiLabs CP210X product pages\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrior to July 1 2014 this cable would come with a PL2303HX chipset and a black USB body. After July 1, 2014 we changed to a violet body and the PL2303TA chipset. The new 'TA cables are Win8 compatible, and are more reliable especially when dealing with random USB-disconnects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of Dec. 21, 2016\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewe will be shipping cables with SiLabs CP2012 chipset instead of Prolific. SiLabs chips seem to have better driver stability, and can handle very high speeds and 'unusual' non-standard baud rates. Other than the driver installation, the cables perform identically.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"USB TTL Cable","offer_id":7380632003,"sku":"954","price":13.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/954-02.jpeg?v=1442513054"},{"product_id":"hifiberry-dac-rca","title":"HiFiBerry DAC+ RCA","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe HiFiBerry DAC+ is a high-resolution digital-to-analog converter. It's made for the Raspberry Pi Model A+\/B+ and all revisions from the Pi 2 to the new Pi 4! This is a special sound card for the Raspberry Pi, that is optimized for one specific use case: the best audio playback quality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated 192kHz\/24bit high-quality Burr-Brown DAC\u003c\/strong\u003e for best sound quality (ESS instead of Burr-Brown on DAC+ Light)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware volume control\u003c\/strong\u003e. You can control the output volume using \"alsamixer\" or any application that supports ALSA mixer controls (not available on DAC+ Light)\u003c\/li\u003e\n\u003cli\u003eConnects directly to the Raspberry Pi, \u003cstrong\u003eno additional cables needed\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo soldering\u003c\/strong\u003e Comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi 2 or B+. \u003ca title=\"Mounting the new HiFiBerry DAC+ on your Raspberry model B+\" href=\"http:\/\/www.hifiberry.com\/2014\/08\/mounting-the-new-hifiberry-dac-on-your-raspberry-model-b\/\"\u003eMounted in less than a minute.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi model A+\/B+ and Pi 2 though Pi 4\u003c\/li\u003e\n\u003cli\u003eDirectly powered from the Raspberry Pi, \u003cstrong\u003eno additional power supply\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-low-noise voltage regulator\u003c\/strong\u003e for optimal audio performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable with different output connectors\u003c\/strong\u003e: RCA or 3.5mm phone jack (DAC+ Light and Pro only available with RCA jacks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated EEPROM for automatic configuration\u003c\/strong\u003e (not DAC+ Light)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eThe board is conform to the Raspberry Pi hardware-attached-on-top (HAT) specification.\u003cbr\u003eNote that this feature is still in development by the Raspberry Pi foundation. You will be able to upgrade your HiFiBerry DAC+ when it is officially available. The sound card already works without this feature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComes with all components required\u003c\/strong\u003e to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC+ Pro advanced features\u003c\/strong\u003e:\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-plated connectors\u003c\/strong\u003e: Gold-plated RCA connectors ensure optimal connection to your RCA cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-domain clock circuit: \u003c\/strong\u003eThe DAC+ Pro uses its own on-board ultra-low-jitter clock generator. To have the lowest jitter values, there are 2 different clocks on board: one for 44.1\/88.2\/176.4 kHz sample rates and another for 48\/97\/192kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHackable\u003c\/strong\u003e: The board can be modified to allow external power supply for the analog part of the board. Also you can connect external I2S DACs. These features need soldering on the board. This will void warranty, but real hardware hackers have no problems with this.\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"line-height: 1.4;\"\u003eThis version uses RCA connectors that you know from your normal stereo equipment. You can use any RCA cable you like. You can even add a phone jack onto the board (you have to solder it by yourself)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e","brand":"HiFiBerry","offers":[{"title":"Default Title","offer_id":31673062260788,"sku":"6000","price":47.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/dacplus.jpg?v=1567198134"},{"product_id":"hdmi-7-800x480-display-backpack-without-touch","title":"HDMI 7\" 800x480 Display Backpack - Without Touch","description":"\u003cp\u003eIts a mini panel-mountable HDMI monitor! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the attached display so its plug-n-play.\u003c\/p\u003e\n\u003cp\u003eThe TFP401 is a beefy DVI\/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP not supported! The 7\" display is 800x480 resolution, which is just enough to run most software, but still small enough that it can be used in portable or embedded projects without the bulk.\u003c\/p\u003e\n\u003cp\u003eYou can even power the entire display from a USB port. With the default 7\" 800x480 display and 150mA backlight current, the current draw is 600mA total. You can reduce that down 400mA by running the backlight at half-brightness (75mA). With the backlight off, the decoder and display itself draws 250mA. If you want more backlight control, there's a PWM input, connect that to your microcontroller or other PWM output and you can continuously dim the backlight as desired.\u003c\/p\u003e\n\u003cp\u003eWe have two versions, one is video only and one is video+touch. T\u003cstrong\u003ehis version does not have a touch screen capability\u003c\/strong\u003e. If you want a screen that you can poke at, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2407\"\u003eget the +touch version\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIn particular, we suggest it for use with single board computers (or desktop\/laptops!) with DVI\/HDMI output like the Raspberry Pi or BeagleBone Black. You can power the driver over USB as long as your computer can supply 600mA on the USB port, and then feed it video via the HDMI port. \u003cstrong\u003ePlease note the TFP401 decoder chip does not contain a video scaler, it will not resize\/shrink video!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-5-800x480-tft-hdmi-monitor-touchscreen-backpack\"\u003ePLEASE CHECK OUT THIS TUTORIAL ON HOW TO SET UP THE RESOLUTION WHEN USING WITH A RASPBERRY PI!\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg \"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 165mm x 102mm x 14mm \/ 6.5\" x 4\" x 0.6\"\u003c\/li\u003e\n\u003cli\u003eWeight: 192g\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"\" href=\"https:\/\/learn.adafruit.com\/adafruit-5-800x480-tft-hdmi-monitor-touchscreen-backpack\/downloads\"\u003eDatasheets and CAD files in tutorial download page\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679173699,"sku":"2406","price":105.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2406-03_a6974fb8-216b-4f9b-9014-104a5117ec4a.jpeg?v=1442511841"},{"product_id":"powerboost-1000-charger-rechargeable-5v-lipo-usb-boost-1a-1000c","title":"PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A - 1000C","description":"\u003cp\u003ePowerBoost 1000C is the perfect power supply for your portable project! \u003cstrong\u003eWith a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery!\u003c\/strong\u003e This little DC\/DC boost converter module can be powered by any 3.7V LiIon\/LiPoly battery, and convert the battery output to 5.2V DC for running your 5V projects.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/powerboost-500-charger-rechargeable-5v-lipo-usb-boost-500ma\"\u003eIf you dont need the 1A battery charger, smart load-sharing, or 1A iOS resistors, check out the Powerboost 500C\u003c\/a\u003e\u003cbr\u003e \u003cbr\u003e Like our popular \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/5v-1a-1000ma-usb-port-power-supply-ul-listed\"\u003e5V 1A USB wall adapter\u003c\/a\u003e, we tweaked the output to be 5.2V instead of a straight-up 5.0V so that there's a little bit of 'headroom' for long cables, high draw, the addition of a diode on the output if you wish, etc. The 5.2V is safe for all 5V-powered electronics like Arduino, Raspberry Pi, or Beagle Bone while preventing icky brown-outs during high current draw because of USB cable resistance.\u003c\/p\u003e\n\u003cp\u003eThe PowerBoost 1000C has at the heart a \u003ca href=\"http:\/\/www.ti.com\/product\/tps61090\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTPS61090 boost converter from TI\u003c\/a\u003e. This boost converter chip has some really nice extras such as low battery detection, 2A internal switch, synchronous conversion, excellent efficiency, and 700KHz high-frequency operation. Check out these specs!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSynchronous operation means you can disconnect the output completely by connecting the ENable pin to ground. This will completely turn off the output\u003c\/li\u003e\n\u003cli\u003e2A internal switch (~2.5A peak limiting) means you can get 1000mA+ from a 3.7V LiPoly\/LiIon battery. Just make sure your battery can handle it!\u003c\/li\u003e\n\u003cli\u003eLow battery indicator LED lights up red when the voltage dips below 3.2V, optimized for LiPo\/LiIon battery usage\u003c\/li\u003e\n\u003cli\u003eOnboard 1000mA charge-rate 'iOS' data resistors. Solder in the USB connector and you can plug in any iPad, iPhone or iPod for 1000mA charge rate.\u003c\/li\u003e\n\u003cli\u003eFull breakout for battery in, control pins and power out\u003c\/li\u003e\n\u003cli\u003e90%+ operating efficiency in most cases (see datasheet for efficiency graphs), and low quiescent current: 5mA when enabled and power LED is on, 20uA when disabled (power and low batt LED are off)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo make this even more useful, we stuck a smart load-sharing Lipoly charger on the other side. The charger circuitry is powered from a microUSB jack, and will recharge any 3.7V\/4.2V LiIon or LiPoly battery at 1000mA max rate. There's two LEDs for monitoring the charge rate, a yellow one tells you its working, a green one lights up when its done.\u003c\/p\u003e\n\u003cp\u003eSince the built-in battery charger has load-sharing, it will automatically switch over to the USB power when available, instead of continuously charging\/draining the battery. This is more efficient, and lets you charge-and-boost at the same time without any interruption on the output so its fine for use as a \"UPS\" (un-interruptable power supply).\u003c\/p\u003e\n\u003cp\u003eJust be aware that the charge rate is 1000mA max, and there's some inefficiency during the boosting stage, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/5v-2-4a-switching-power-supply-w-20awg-6-microusb-cable\"\u003eso \u003cstrong\u003emake super sure that the USB adapter you're using to charge with is high quality, can supply 2A and has thick power wires\u003c\/strong\u003e\u003c\/a\u003e. \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/5v-2-4a-switching-power-supply-w-20awg-6-microusb-cable\"\u003eThis one from Adafruit is ideal and has been tested\u003c\/a\u003e, lower quality ones will not act well due to the voltage drop on the wires or droop on the power supply. This is \u003ca href=\"http:\/\/www.adafruit.com\/datasheets\/MCP73871.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eespecially true if you're actually drawing 1000mA out of the PowerBoost 1000C, the MCP73871 maxes out at 1.8A\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis charger-booster is great for powering your robot, Arduino project, single-board-computer such as Raspberry Pi or BeagleBone! Each order comes with one fully assembled and tested PCB and a loose USB A jack. If you are powering your project from USB, solder the USB A jack in (a 3-minute soldering task). \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/terminal-block-2-pin-3-5mm-pack-of-5\"\u003eIf you would like to use a terminal block, pick up a 3.5mm 2pin block here\u003c\/a\u003e and solder to the output spot where the USB jack would go. Or don't solder anything in for a more compact power pack.\u003c\/p\u003e\n\u003cp\u003eIf you're trying to figure out how much current your project is using, check out the \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=1852\"\u003eCHARGER DOCTOR\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eYou may get an off-white or black JST connector. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"visible-sm visible-xs\"\u003eTECHNICAL DETAILS \u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse in-md in-lg collapse in\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions (assembled with USB-A): 23mm x 45mm x 10mm \/ 0.9\" x 1.8\" x 0.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-powerboost-1000c-load-share-usb-charge-boost\/downloads\"\u003eDatasheets, schematic, EagleCAD PCB files, and Fritzing object available in the product tutorial\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\" alt=\"\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679181123,"sku":"2465","price":25.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/13907-01c.jpeg?v=1567195616"},{"product_id":"adafruit-pitft-2-4-hat-mini-kit-320x240-tft-touchscreen","title":"Adafruit PiTFT 2.4\" HAT Mini Kit - 320x240 TFT Touchscreen","description":"\u003cmeta charset=\"utf-8\"\u003e\r\u003cp\u003eThis display features a 2.4\" display with 320x240 16-bit color pixels and a resistive touch overlay. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!\u003c\/p\u003e\r\u003cp\u003e\u003cstrong\u003eIt's designed to fit nicely onto the Pi Model A+, B+ or Pi 2.\u003c\/strong\u003e\u003c\/p\u003e\r\u003cp\u003eThis design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there's 5 spots for optional \u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/tactile-switch-buttons-6mm-slim-x-20-pack?variant=1626692036\" title=\"Tactile switches\"\u003eslim tactile switches\u003c\/a\u003e wired to five GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button.\u003c\/p\u003e\r\u003cp\u003eWe have a right-angle 26-pin connector off to the side. You can connect a classic 26-pin Raspberry Pi GPIO cable in order to access the rest of the GPIO through a Cobbler, etc.\u003c\/p\u003e\r\u003cp\u003eTo make it super easy for use: we've created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands.\u003c\/p\u003e\r\u003cp\u003eEach order ships with an assembled HAT with 2.4\" TFT display with resistive touchscreen and a 2x20 female socket header. Some light soldering is required to attach the header but it is easy work for anyone with a soldering iron \u0026amp; solder.Alternatively, you can use a stacking type header instead if you'd like to plug a 2x20 GPIO cable on top\u003c\/p\u003e\r\u003cp\u003e\u003cstrong\u003eRaspberry Pi, Pi enclosure, 26-pin GPIO cable, tactile switches are not included!\u003c\/strong\u003e\u003c\/p\u003e\r\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-4-pitft-hat-with-resistive-touchscreen-mini-kit\"\u003eAdafruit's tutorial series shows you how to install the software, as well as calibrate the touchscreen, display videos, display images such as from your PiCam and more!\u003c\/a\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679186883,"sku":"2455","price":45.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2455-08_a16a2ea1-1914-4d5e-ac5e-4f58eabee720.jpeg?v=1442511862"},{"product_id":"pitft-plus-320x240-2-8-tft-capacitive-touchscreen-mini-kit-pi-2-and-model-a-b","title":"PiTFT Plus 320x240 2.8\" TFT + Capacitive Touchscreen Mini Kit - Pi 2 and Model A+ \/ B+","description":"\u003cp\u003eIs this not the cutest little display for the Raspberry Pi? It features a 2.8\" display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad. The screen looks much nicer, with a black bezel and glass overlay.\u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2298\"\u003e If you don't need a capacitive touchscreen, check out the resistive touch version.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis updated design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A+, B+!\u003c\/strong\u003e (Any Pi with a 2x20 connector) \u003cb\u003eNot for use with an old Pi 1 with 2x13 connector\u003c\/b\u003e If you'd like to use a 2.8\" display with the original Pi A or Pi B,\u003cstrong\u003e \u003c\/strong\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/pitft-2-8-tft-320x240-capacitive-touchscreen-for-raspberry-pi\"\u003echeck out the Model B version\u003c\/a\u003e. This version also has all 40 pins GPIO pins brought out so you can connect a 40-pin GPIO cable underneath. Now that it's the same outline as a Pi 3\/2\/B+ it fits well on top of a Pi in our Raspberry Pi Enclosure base and can \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2807\" target=\"\"\u003euse our faceplate for a compact touchscreen Pi\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe display and touchscreen uses the hardware I2C Pins (SDA \u0026amp; SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there's 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button.\u003c\/p\u003e\n\u003cp\u003eUse it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi computer and enclosure not included! \u003c\/strong\u003eAs of July 22nd, 2015 this display comes fully assembled with tactile switches too\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-8-pitft-capacitive-touch\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCheck out our detailed tutorial on how to play videos, display images, and otherwise customize your PiTFT.\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg \"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eScreen Dimensions: 50mm x 69mm x 4mm \/ 2\" x 2.7\" x 0.16\"\u003c\/li\u003e\n\u003cli\u003ePCB Dimensions: 56mm x 85mm x 11mm \/ 2.2\" x 3.3\" x 0.4\"\u003c\/li\u003e\n\u003cli\u003eWeight: 47g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-8-pitft-capacitive-touch\/downloads\"\u003eDatasheets, EagleCAD PCB files, Fritzing object and more in the tutorial!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679203139,"sku":"2423","price":59.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2423-05_0fd22a6d-dda2-4da3-a432-2c3b9062352b.jpeg?v=1442511880"},{"product_id":"adafruit-perma-proto-hat-for-pi-mini-kit-with-eeprom","title":"Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM","description":"\u003cp\u003e\u003ca class=\"pishop_product_link\" title=\"Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM\" href=\"https:\/\/www.pishop.ca\/product\/adafruit-perma-proto-hat-for-pi-mini-kit-with-eeprom\/\" target=\"_blank\"\u003eView on PiShop.ca (SKU 230)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDesign your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit \u003cstrong\u003ewith EEPROM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1\" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless breadboards you're familiar. There's also long power strips for +3V, +5V and Ground connections to the Pi. Near the top we break out nearly every pin you could want to connect to the Pi (#26 didnt quite make the cut).\u003c\/p\u003e\n\u003cp\u003eThis is the fancier version of our Perma-Proto HAT.  It comes with a printed circuit board and a single \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/gpio-header-for-raspberry-pi-a-b-pi-2-pi-3\"\u003e2x20 GPIO Header for \u003c\/a\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/gpio-header-for-raspberry-pi-a-b-pi-2-pi-3\"\u003eRaspberry Pi\u003c\/a\u003e to put your Perma-Proto on top of your Raspberry Pi (like a nice little hat...) This version comes with a blank 24C32 I2C EEPROM soldered on and connected to the EEDAT\/EECLK lines so \u003cem\u003eyou cannot 'stack' it with other HATs\u003c\/em\u003e. \u003ca href=\"https:\/\/github.com\/raspberrypi\/hats\"\u003eHowever, you \u003cem\u003ecan\u003c\/em\u003e program in the EEPROM to make a self-identifying setup using the Pi Foundations' HAT specs\u003c\/a\u003e - please note the specifications are still under development.\u003c\/p\u003e\n\u003cp\u003eYou can customize your Perma-Proto setup using a \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2223\"\u003estandard 2x20 stacking header\u003c\/a\u003e or \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/stacking-header-for-pi-a-b-pi-2-pi-3-2x20-extra-tall-header\"\u003eextra tall 2x20 stacking header\u003c\/a\u003e. You can also swap out the 2x20 header with \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2243\"\u003ea slim 2x20 type if you want it to sit closer to the Pi\u003c\/a\u003e, or \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=1992\"\u003ean extra tall one if you want it to sit above the USB\/Ethernet ports\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eA bit of light soldering is required to attach the header to the PCB but it's easy work.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThis hat is only compatible with the Raspberry Pi A+, B+, or Pi 2! \u003c\/strong\u003eIt will not work with the Raspberry Pi Model A or B.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOur initial version has the +3V and +5V markings in blue, and the GND markings in red, future orders will have these colors swapped to better match a solderless breadboard\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" width=\"560\" src=\"\/\/www.youtube.com\/embed\/UXDF-3m-zuU?start=995\" class=\"ta-insert-video\" contenteditable=\"false\" frameborder=\"0\" allowfullscreen=\"true\" ta-insert-video=\"\/\/www.youtube.com\/embed\/UXDF-3m-zuU?start=995\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679255939,"sku":"2314","price":10.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2314-05_3e1bbb11-6730-44c4-a118-228db0fad9a2.jpeg?v=1442511948"},{"product_id":"gpio-stacking-header-for-pi-a-b-pi-2-extra-long-2x20-pins","title":"GPIO Stacking Header for Pi A+\/B+\/Pi 2 - Extra-long 2x20 Pins","description":"\u003cp\u003eConnect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB\/Ethernet jacks. This header has extra long 10mm pins, compared with our \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2222\"\u003eplain version\u003c\/a\u003e which is the same base height but has 3mm header pins instead. With 10mm you can have a HAT that has extra pins to stack another HAT on top!\u003c\/p\u003e\n\u003cp\u003eYou'll get one stackable header per order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: The Raspberry Pi Model A+, Raspberry Pi 2 and Raspberry Pi 3 are also compatible with this product!\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"visible-sm visible-xs\"\u003e\u003cstrong\u003eTECHNICAL DETAILS\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse in-md in-lg collapse in\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 5mm x 51mm x 19mm \/ 0.2\" x 2\" x 0.7\"\u003c\/li\u003e\n\u003cli\u003ePin Length: 10mm\u003c\/li\u003e\n\u003cli\u003ePin Spacing: 2.5mm \/ 0.1\"\u003c\/li\u003e\n\u003cli\u003ePin Thickness: 0.6mm \/ 0.02\"\u003c\/li\u003e\n\u003cli\u003eWeight: 4.1g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/rohs_icon.jpg\" width=\"100\" height=\"100\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/2223\/18507.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679261123,"sku":"2223","price":3.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2223-00_075b8cd3-f0dd-44a2-b2fe-b0c06601e846.jpeg?v=1442511957"},{"product_id":"adafruit-rgb-matrix-hat-rtc-for-raspberry-pi-mini-kit","title":"Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit","description":"\u003cp\u003eYou can now create a dazzling display with your Raspberry Pi Model A+\/B+ with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those we stock in the shop and create a colorful scrolling display or mini LED wall with ease.\u003c\/p\u003e\n\u003cp\u003eThis HAT is Adafruit's finest to date, full of some really great circuitry. Let me break it down for you:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple design\u003c\/strong\u003e - plug in power, plug in IDC cable, runs our Python code!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower protection circuitry\u003c\/strong\u003e - you can plug a 5V 4A wall adapter into the HAT and it will automatically protect against negative, over or under-voltages! Yay for no accidental destruction of your setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard level shifters\u003c\/strong\u003e to convert the RasPi's 3.3V to 5.0V logic for clean and glitch free matrix driving\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS1307 Real Time Clock\u003c\/strong\u003e can keep track of time for the Pi even when it is rebooted or powered down, to make for really nice time displays\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWorks with any of Adafruit's 16x32, 32x32 or 32x64 RGB LED Matrices with HUB75 connections. You can even chain multiple matrices together for a longer display, you can chain as many as you like but the bigger the display the harder it is on the Pi so keep that in mind! We don't recommend more than 32x128 pixel setups\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this HAT is only for use with HUB75 type RGB Matrices. Not for use with NeoPixel, DotStar, or other 'addressable' LEDs.\u003c\/p\u003e\n\u003cp\u003eEach order comes with a HAT PCB with all surface mount parts assembled, a 2x20 female socket connector, a 2 pin terminal block, and a 2x8 IDC socket connector.\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eA CR1220 coin cell is not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/search?q=RGB+matrix\" title=\"RGB Matrices Matrix\"\u003eRGB Matrix is not included, please check out our fine selection\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA 5V power supply is also required, not included,\u003c\/strong\u003e for power the matrix itself, the Pi cannot do it, to calculate the power, multiply the width of all the chained matrix by 0.06 : A 32 pixel wide matrix needs 32*0.06 = 3.85A so pick up a 5V 4A power supply or our \u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/5v-10a-switching-power-supply\" title=\"10 amp power supply perfect for LED matrix\"\u003ebeefy 10A power supply\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi\" title=\"Raspberry Pi Model A+ and B+\"\u003eRaspberry Pi \u003c\/a\u003enot included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSome light soldering is required to attach the headers to your Pi. A soldering iron and solder are required, but it's not a complex soldering job and most beginners can do it in about 15 minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-rgb-matrix-plus-real-time-clock-hat-for-raspberry-pi\" target=\"_blank\"\u003eCheck out Adafruit's full tutorial with schematics, wiring diagrams, instructions and a Python library so you can get drawing fast!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003ePCB Dimensions: 65mm x 57mm x 2mm \/ 2.6\" x 2.2\" x 0.08\"\u003c\/li\u003e\n\u003cli\u003eHeight (with barrel input): 13mm \/ 0.5\"\u003c\/li\u003e\n\u003cli\u003eWeight: 15g\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-rgb-matrix-plus-real-time-clock-hat-for-raspberry-pi\/downloads\"\u003eDatasheets, EagleCAD PCB files, and Fritzing available in the product tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRevision History:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of October 2018,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewe now sell a version that can be used with 64x64 pixel matrices that have an 'E' address pin, default is Raspberry Pi GPIO #24. You can select address E on pin 8 or 16 by soldering closed a jumper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679268227,"sku":"2345","price":32.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2345-00_03f4d6d4-69b0-449d-88e0-d6692c68b8b7.jpeg?v=1442511967"},{"product_id":"adafruit-capacitive-touch-hat-for-raspberry-pi-mini-kit","title":"Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit","description":"\u003cp\u003eThis touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch sensing used for stuff like touch-reactive tablets and phones, as well as control panels for appliances, which is where you may have used it before. This HAT allows you to create electronics that can react to human touch, with up to 12 individual sensors.\u003c\/p\u003e\n\u003cp\u003eThe HAT has 12 'figure 8' holes in it that can be gripped onto with alligator clip cables. Attach one side of the clip to the HAT and the other side to something electrically conductive (like metal) or full of water (like vegetables or fruit!) Then start up our handy Python library code to detect when the object is touched. That's pretty much it, very easy! For advanced users, you can also solder to a pad to make a slimmer \u0026amp; more permanent connection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks great with Raspberry Pi Model A+, B+, 2, and 3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/mpr121-capacitive-touch-sensor-on-raspberry-pi-and-beaglebone-black\"\u003eAdafruit is working on a detailed tutorial, meanwhile you can check out the tutorial for the non-HAT\/breakout-version of this chip with the Raspberry Pi here\u003c\/a\u003e which uses the exact same library and code. We have examples for reading touches, turning touches into keyboard KeyUp\/KeyDown presses (so you can make a veggie-keyboard) as well as an audio player that will play a sound per sensor (fruit drums!)\u003c\/p\u003e\n\u003cp\u003eEach order comes with a Capacitive Touch HAT and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but its easy to do with basic soldering tools like a soldering iron and rosin core electronics solder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note!\u003c\/strong\u003e \u003cstrong\u003eThis kit does not come with \u003ca href=\"http:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi-systems\/products\/raspberry-pi-model-b\" title=\"Raspberry Pi Model B+\"\u003eRaspberry Pi\u003c\/a\u003e, alligator clips, speaker, or delicious fruit! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/WMivDdIGpUE?start=14\" allowfullscreen=\"\" width=\"560\" height=\"315\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679272259,"sku":"2340","price":19.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2340-00_31eca82e-f4f3-4c4b-804c-c3645d5d0c0b.gif?v=1480536005"},{"product_id":"adafruit-pitft-2-2-hat-mini-kit-320x240-2-2-tft-no-touch","title":"Adafruit PiTFT 2.2\" HAT Mini Kit - 320x240 2.2\" TFT - No Touch","description":"\u003cp\u003eThe cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2\" display with 320x240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top of your Model A+ or B+ and fits into our case quite nicely.\u003cbr\u003e \u003cbr\u003e It's designed to plug directly onto the Raspberry Pi 2 or Raspberry Pi 1 Model A+ or B+ . While not specifically designed for Pi Model A or B, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/gpio-header-for-raspberry-pi-extra-tall-2x13-female-header\"\u003eyou can use it with A\/B if you solder in an extra-tall 2x13 header (not included)\u003c\/a\u003e instead of the included 2x20 header\u003c\/p\u003e\n\u003cp\u003eThis design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since we had a tiny bit of space, there's 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button.\u003c\/p\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eComes as a fully assembled display PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2223\"\u003eYou can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top\u003c\/a\u003e or a \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/gpio-header-for-raspberry-pi-hat-2x20-short-female-header\"\u003eslim ultra-low-profile header.\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-2-2-pitft-hat-320-240-primary-display-for-raspberry-pi\"\u003eTo make it super easy for use: we've created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Our tutorial series shows you how to install the software, play small videos, or display images such as from your PiCam and more!\u003c\/a\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679338243,"sku":"2315","price":32.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2315-04_e660a845-ae01-4636-982e-02353c97601a.jpeg?v=1442512052"},{"product_id":"adafruit-ultimate-gps-hat-for-raspberry-pi-a-or-b-mini-kit","title":"Adafruit Ultimate GPS HAT for Raspberry Pi A+\/B+\/Pi 2\/3\/Pi 4 - Mini Kit","description":"\u003cdiv\u003e\n\u003cp\u003eIt's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRaspberry Pi Model Pi 3, Pi Zero, A+, B+, or Pi 2, 3, \u0026amp; 4!\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eHere's the low-down on the GPS module:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e-165 dBm sensitivity, 10 Hz updates, 66 channels\u003c\/li\u003e\n\u003cli\u003eOnly 20mA current draw\u003c\/li\u003e\n\u003cli\u003eBuilt in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!\u003c\/li\u003e\n\u003cli\u003ePPS output on fix, by default connected to pin #4\u003c\/li\u003e\n\u003cli\u003eInternal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view\u003c\/li\u003e\n\u003cli\u003eFix status LED blinks to let you know when the GPS has determined the current coordinates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note, this HAT takes over the Raspberry Pi's hardware UART to send\/receive data to and from the GPS module\u003c\/strong\u003e. So, if you need to use the RX\/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-ultimate-gps-hat-for-raspberry-pi\/\"\u003eRead up on our tutorial for more information on how to use this fine HAT\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eComes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2223\"\u003eYou can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top\u003c\/a\u003e or a \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/gpio-header-for-raspberry-pi-hat-2x20-short-female-header\"\u003eslim ultra-low-profile header.\u003c\/a\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo make air-shipping eaiser, this HAT does not come with a 12mm coin battery! \u003c\/strong\u003eA CR1220 will let you use the real-time-clock capability of the GPS HAT, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/cr1220-12mm-diameter-3v-lithium-coin-cell-battery\"\u003eyou can pick one up locally or order one from us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions w\/ components: 65mm x 56mm x 7mm \/ 2.6\" x 2.2\" x 0.3\"\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-ultimate-gps-hat-for-raspberry-pi\/downloads\"\u003eDatasheets, EagleCAD PCB files, and Fritzing object available in the product tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679340803,"sku":"2324","price":59.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2324-01_402e616b-8f66-4072-af25-228c3a2e8c8b.jpeg?v=1442512058"},{"product_id":"pimoroni-unicorn-hat-8x8-rgb-led-shield-for-raspberry-pi-a-b","title":"Pimoroni Unicorn Hat - 8x8 RGB LED Shield for Raspberry Pi A+\/B+","description":"\u003cp\u003e\u003ca class=\"pishop_product_link\" title=\"Unicorn HAT\" href=\"https:\/\/www.pishop.ca\/product\/unicorn-hat\/\" target=\"_blank\"\u003eView on PiShop.ca (SKU 464)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSnap the \u003ca href=\"http:\/\/shop.pimoroni.com\/\"\u003ePimoroni\u003c\/a\u003e\u003cstrong\u003e Unicorn Hat\u003c\/strong\u003e on top of a Raspberry Pi \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2266\"\u003emodel A+\u003c\/a\u003e or a \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=1914\"\u003emodel B+\u003c\/a\u003e for a fun 8x8 RGB LED matrix powered directly from the Pi.\u003c\/p\u003e\n\u003cp\u003eUnicorn HAT provides a wash of controllable color that is ideal for mood-lighting, 8x8 pixel art, persistence of vision effects, status indications, or just blasting colour into your surroundings.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e64 RGB LEDs (WS2812B) each wtih 24-bit RGB color\u003c\/li\u003e\n\u003cli\u003ePython API (NeoPixel compatible!)\u003c\/li\u003e\n\u003cli\u003eEEPROM with Raspberry Pi HAT configuration details\u003c\/li\u003e\n\u003cli\u003eLED data driven via DMA over PWM Pin #18\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe height=\"315\" width=\"560\" src=\"\/\/www.youtube.com\/embed\/qm-LZEEMvho?start=284\" class=\"ta-insert-video\" contenteditable=\"false\" frameborder=\"0\" allowfullscreen=\"true\" ta-insert-video=\"\/\/www.youtube.com\/embed\/qm-LZEEMvho?start=284\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eAdafruit 2288\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":7679355971,"sku":"PIM054","price":46.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2288-06_3564332b-3dd0-4790-81bf-2f363c261c14.gif?v=1442512075"},{"product_id":"pimoroni-display-o-tron-3000","title":"Pimoroni Display-O-Tron RGB Breakout","description":"\u003cp\u003eThis is the lovely little 16 x 3 character LCD we use on Display-O-Tron with an RGB backlight breakout board to mount it on!\u003c\/p\u003e\n\u003cp\u003eWe've added circuitry to allow the display to run at either 3V3 or 5V and also included an RGB backlight to make your project look even more awesome! The RGB backlight is driven by FETs on the board so all you need to do is supply a logic level signal to the R, G, and B pins (which can be PWM-ed)!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-contrast LCD display (\u003cspan\u003e3 x 16 characters)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBright RGB backlight (controllable with PWM signals)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eM2.5 mounting holes\u003c\/li\u003e\n\u003cli\u003eST7036 controller supporting 4-bit, 8-bit, and SPI interfaces\u003c\/li\u003e\n\u003cli\u003eOperates from either a 5V or 3V3 power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt supports SPI, 4-bit, and 8-bit addressing (you can talk to it just like a HD44780 display) making it easy to use with many micro-controllers or platforms (such as Raspberry Pi). We've set it up so that it can run from both 3V3 and 5V supplies.\u003c\/p\u003e\n\u003cp\u003eThe datasheet contains sample wiring diagrams (see page 4) for all modes of operation - it's actually really darn helpful!\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.lcd-module.com\/eng\/pdf\/doma\/dog-me.pdf\"\u003eView the full datasheet.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eYou can use this LCD with your Raspberry Pi using our \u003ca href=\"https:\/\/github.com\/pimoroni\/st7036\"\u003ePython ST7036 driver\u003c\/a\u003e or with an Arduino using the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/wayoda\/DogLcd\"\u003eDogLcd library\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: this is a kit that requires basic soldering!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":7679365379,"sku":"PIM146","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/Display-O-Tron_Breakout_2_of_3_768x768_e645db22-f7d6-43d6-b918-e3d46a20cf16.jpg?v=1657136267"},{"product_id":"cyntech-raspberry-pi-case-for-model-b-in-white","title":"Cyntech Raspberry Pi Case for Pi 2 and Model B+ in White","description":"\u003cp\u003eCyntech's range of gorgeous Raspberry Pi cases are the perfect addition to any Raspberry Pi 2 or Model B+!\u003c\/p\u003e\n\u003cp\u003eFeatures of the case are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated LED light pipes to display the Raspberry Pi's status\u003c\/li\u003e\n\u003cli\u003eFlush micro SD slot\u003c\/li\u003e\n\u003cli\u003eGPIO slot for 40 pins ribbon cable\u003c\/li\u003e\n\u003cli\u003eLCD\/Camera cable exit slot\u003c\/li\u003e\n\u003cli\u003eMatte finish\u003c\/li\u003e\n\u003cli\u003eVESA mount\u003c\/li\u003e\n\u003cli\u003eWall mount feature\u003c\/li\u003e\n\u003cli\u003ePi secured via up to 4 screws\u003c\/li\u003e\n\u003cli\u003eAdditional covers available to protect the ports from dust\u003c\/li\u003e\n\u003cli\u003eA\u003cspan\u003evailable \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-model-b-case-sd-cover\" title=\"MicroSD cover for Cyntech Raspberry Pi Model B+ Case\"\u003emicroSD cover\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-model-b-usb-hdmi-cover\" title=\"USB\/HDMI cover for Raspberry Pi Model B+ Case\"\u003eUSB\/HDMI cover\u003c\/a\u003e\u003cspan\u003e for protection and security\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional Stackable Spacer - 10mm spacer sits between base and lid so you can leave accessories on GPIO and put lid on. These are a non-stocked item, let us know if you need one\u003c\/li\u003e\n\u003cli\u003eDesigned in the UK\u003c\/li\u003e\n\u003cli\u003eAlso available in \u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-raspberry-pi-b-plus-case-clear\" title=\"Raspberry Pi Model B Plus Case in Clear\"\u003eclear\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cyntech","offers":[{"title":"Case only","offer_id":7679365891,"sku":"C4004","price":11.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/White_B_Case_grande_b8ac6113-0ab7-45fa-b875-3f70ed1eb927.jpeg?v=1442512092"},{"product_id":"copy-of-cyntech-raspberry-pi-case-for-model-b-in-blue","title":"Cyntech Raspberry Pi Case for Pi 2 and Model B+ in Blue","description":"\u003cp\u003eCyntech's range of gorgeous Raspberry Pi cases are the perfect addition to any Pi 2 or Model B+!\u003c\/p\u003e\n\u003cp\u003eFeatures of the case are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated LED light pipes to display the Raspberry Pi's status\u003c\/li\u003e\n\u003cli\u003eFlush micro SD slot\u003c\/li\u003e\n\u003cli\u003eGPIO slot for 40 pins ribbon cable\u003c\/li\u003e\n\u003cli\u003eLCD\/Camera cable exit slot\u003c\/li\u003e\n\u003cli\u003eMatte finish\u003c\/li\u003e\n\u003cli\u003eVESA mount\u003c\/li\u003e\n\u003cli\u003eWall mount feature\u003c\/li\u003e\n\u003cli\u003ePi secured via up to 4 screws\u003c\/li\u003e\n\u003cli\u003eAdditional covers available to protect the ports from dust\u003c\/li\u003e\n\u003cli\u003eA\u003cspan\u003evailable \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-model-b-case-sd-cover\" title=\"MicroSD cover for Cyntech Raspberry Pi Model B+ Case\"\u003emicroSD cover\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-model-b-usb-hdmi-cover\" title=\"USB\/HDMI cover for Raspberry Pi Model B+ Case\"\u003eUSB\/HDMI cover\u003c\/a\u003e\u003cspan\u003e for protection and security\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional Stackable Spacer - 10mm spacer sits between base and lid so you can leave accessories on GPIO and put lid on. These are a non-stocked item, let us know if you need one\u003c\/li\u003e\n\u003cli\u003eDesigned in the UK\u003c\/li\u003e\n\u003cli\u003eA\u003cspan\u003evailable in \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-raspberry-pi-b-plus-case-clear\" title=\"Raspberry Pi Model B Plus Case in Clear\"\u003eclear\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi-model-b\/products\/cyntech-raspberry-pi-model-b-plus-case-black\" title=\"Cyntech Model B+ Case in Black\"\u003eblack\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi-model-b\/products\/copy-of-cyntech-raspberry-pi-case-for-model-b-in-blue\" title=\"Cyntech Model B+ Case in Blue\"\u003eblue\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi-model-b\/products\/cyntech-raspberry-pi-case-for-model-b-in-white\" title=\"Cyntech Model B+ Case in White\"\u003ewhite\u003c\/a\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-raspberry-pi-case-for-model-b-in-red\" title=\"Cyntech Model B+ Case in Raspberry Red\"\u003eraspberry red\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This case will not fit the Raspberry Pi 4B!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Cyntech","offers":[{"title":"Case only","offer_id":7679367939,"sku":"C4002","price":11.99,"currency_code":"CAD","in_stock":false},{"title":"Include microSD cover","offer_id":7679368067,"sku":"C4002-4012","price":14.59,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/Blue_B_Case_grande_eec8b3b4-bf6b-4c20-af5f-5cb436a6df7b.jpeg?v=1442512099"},{"product_id":"adafruit-raspberry-pi-b-case-smoke-base-w-clear-top","title":"Adafruit Raspberry Pi B+ Case - Smoke Base w\/ Clear Top","description":"\u003cp\u003eIt took awhile to perfect - but that's okay since we can now safely say that the Adafruit case for Raspberry Pi Model B+ \/ Pi 2 \/ Pi 3 is The Single Greatest Raspberry Pi Model B+ Case Ever.\u003c\/p\u003e\n\u003cp\u003eThis enclosure was designed by Mike Doell - just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B.  Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro SD card, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable to extend out from the Pi.\u003c\/p\u003e\n\u003cp\u003eThe Pi snaps into the base and the lid fits snugly onto the top.  If you want to break out your Pi you can use your case without the lid and add hats to your B+ with ease.\u003cbr\u003e \u003cbr\u003e This is the basic, classic enclosure with a smoke base and a clear top.  More colors are coming soon and we'll have packs to mix and match for ultimate Raspberry Pi B+ enclosure fun, but we'll be starting out with this very neutral gray\/clear combo.\u003c\/p\u003e\n\u003cp\u003eThis case works for the Raspberry Pi Model B+ \/ Pi 2 \/ Pi 3 only. \u003cstrong\u003e It does not work for the Raspberry Pi Model A or B\u003c\/strong\u003e.  It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo Pi, cables, or Pi Camera included.  This product is just the case!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHere's how to insert a Raspberry Pi into our case:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Here's how to insert a Raspberry Pi into our case:\" src=\"http:\/\/www.adafruit.com\/images\/product-files\/2285\/SHORTER_Pi_Into_Case_GIF.gif\" style=\"width: 500px; height: 375px;\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-heading-row\"\u003e\n\u003ch2 id=\"tab-technical-details-heading\"\u003eTechnical Details\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eCase Dimensions (without lid): 93mm x 63mm x 25mm \/ 3.7\" x 2.5\" x 1.0\"\u003c\/li\u003e\n\u003cli\u003eLid Thickness: 4mm \/ 0.2\"\u003c\/li\u003e\n\u003cli\u003e 47g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679383043,"sku":"2258","price":11.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2258-06_d4ee842c-6753-458d-b803-1963b45fc24b.gif?v=1442512184"},{"product_id":"cyntech-raspberry-pi-model-b-plus-case-black","title":"Cyntech Raspberry Pi Case for Pi 3, Pi 2 and Model B+ in Black","description":"\u003cp\u003eCyntech's range of gorgeous Raspberry Pi cases are the perfect addition to any Model B+!\u003c\/p\u003e\n\u003cp\u003eFeatures of the case are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Model B+, Pi 2, and Pi 3\u003c\/li\u003e\n\u003cli\u003eIntegrated LED light pipes to display the Raspberry Pi's status\u003c\/li\u003e\n\u003cli\u003eFlush micro SD slot\u003c\/li\u003e\n\u003cli\u003eGPIO slot for 40 pins ribbon cable\u003c\/li\u003e\n\u003cli\u003eLCD\/Camera cable exit slot\u003c\/li\u003e\n\u003cli\u003eMatte finish\u003c\/li\u003e\n\u003cli\u003eVESA mount\u003c\/li\u003e\n\u003cli\u003eWall mount feature\u003c\/li\u003e\n\u003cli\u003ePi secured via up to 4 screws\u003c\/li\u003e\n\u003cli\u003eAdditional covers available to protect the ports from dust\u003c\/li\u003e\n\u003cli\u003eA\u003cspan\u003evailable \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-model-b-case-sd-cover\" title=\"MicroSD cover for Cyntech Raspberry Pi Model B+ Case\"\u003emicroSD cover\u003c\/a\u003e\u003cspan\u003e and \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-model-b-usb-hdmi-cover\" title=\"USB\/HDMI cover for Raspberry Pi Model B+ Case\"\u003eUSB\/HDMI cover\u003c\/a\u003e\u003cspan\u003e for protection and security\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional Stackable Spacer - 10mm spacer sits between base and lid so you can leave accessories on GPIO and put lid on. These are a non-stocked item, let us know if you need one\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cyntech","offers":[{"title":"Case only","offer_id":7679415811,"sku":"C4001","price":11.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/Black_B_Case-1_171a6cff-054f-413e-b754-071bc151fde2.jpeg?v=1442512316"},{"product_id":"cyntech-raspberry-pi-b-plus-case-clear","title":"Cyntech Raspberry Pi Case for Pi 2 and Model B+ in Clear","description":"\u003cp\u003eCyntech's range of gorgeous Raspberry Pi cases are the perfect addition to any Pi 2 or Model B+!\u003c\/p\u003e\n\u003cp\u003eFeatures of the case are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi 2 Model B or Model B+ two part plastic case\u003c\/li\u003e\n\u003cli\u003eIntegrated LED light pipes to display the Raspberry Pi's status\u003c\/li\u003e\n\u003cli\u003eClear top cover on the clear version\u003c\/li\u003e\n\u003cli\u003eFlush micro SD slot\u003c\/li\u003e\n\u003cli\u003eGPIO slot for 40 pins ribbon cable\u003c\/li\u003e\n\u003cli\u003eLCD\/Camera cable exit slot\u003c\/li\u003e\n\u003cli\u003eMatte finish\u003c\/li\u003e\n\u003cli\u003eVESA mount\u003c\/li\u003e\n\u003cli\u003eWall mount feature\u003c\/li\u003e\n\u003cli\u003ePi secured via up to 4 screws\u003c\/li\u003e\n\u003cli\u003eAvailable \u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-model-b-case-sd-cover\" title=\"MicroSD cover for Cyntech Raspberry Pi Model B+ Case\"\u003emicroSD cover\u003c\/a\u003e and \u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-model-b-usb-hdmi-cover\" title=\"USB\/HDMI cover for Raspberry Pi Model B+ Case\"\u003eUSB\/HDMI cover\u003c\/a\u003e for protection and security\u003c\/li\u003e\n\u003cli\u003eOptional Stackable Spacer - 10mm spacer sits between base and lid so you can leave accessories on GPIO and put lid on. These are a non-stocked item, let us know if you need one.\u003c\/li\u003e\n\u003cli\u003eDesigned in the UK\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eAvailable in \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/products\/cyntech-raspberry-pi-b-plus-case-clear\" title=\"Raspberry Pi Model B Plus Case in Clear\"\u003eclear\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi-model-b\/products\/cyntech-raspberry-pi-model-b-plus-case-black\" title=\"Cyntech Model B+ Case in Black\"\u003eblack\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi-model-b\/products\/copy-of-cyntech-raspberry-pi-case-for-model-b-in-blue\" title=\"Cyntech Model B+ Case in Blue\"\u003eblue\u003c\/a\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003ca href=\"http:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi-model-b\/products\/cyntech-raspberry-pi-case-for-model-b-in-white\" title=\"Cyntech Model B+ Case in White\"\u003ewhite\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cyntech","offers":[{"title":"Case Only","offer_id":7679421699,"sku":"C4000","price":11.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/Cyntech_RPi-B__01-Clear_2d811c9e-7d62-489e-a106-e321ad144d32.jpeg?v=1442512320"},{"product_id":"hdmi-flat-cable-1-foot-30cm-long","title":"HDMI Flat Cable - 1 foot \/ 30cm long","description":"\u003cp\u003eConnect two HDMI devices together and save space with this basic flat HDMI 1.4 cable. It has nice molded grips for easy installation, and is 1 foot long (~30 cm).\u003c\/p\u003e\n\u003cp\u003eThis cable is absolutely \u003cstrong\u003eperfect\u003c\/strong\u003e for an LCD Raspberry Pi project. The cable is so thin and flexible that you won't have any loose dangling HDMI cables getting in the way, and you can even fit your Pi behind the screen.\u003c\/p\u003e\n\u003cdiv class=\"tab-heading-row\"\u003e\n\u003ch2 id=\"tab-technical-details-heading\"\u003eTechnical Details\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eThickness: 2.7mm \/ 0.1\"\u003c\/li\u003e\n\u003cli\u003eLength: 1 foot \/ 30.5cm\u003c\/li\u003e\n\u003cli\u003eWeight: 27g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679425155,"sku":"2197","price":5.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2197-00_de08734f-628c-432b-8f72-f318774b5796.jpeg?v=1442512324"},{"product_id":"assembled-pi-t-cobbler-plus-gpio-breakout-for-raspberry-pi-b","title":"Assembled Pi T-Cobbler Plus - GPIO Breakout for Raspberry Pi A+,  B+, Pi 2 and Pi 3","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the assembled version of the Pi T-Cobbler Plus.   It works with all modern Pi's released after 2014 (A+, B+, 2, 3, etc)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis Cobbler is in a fancy T-shape, which is not as compact, but is a little easier to read the labels. \u003c\/span\u003e\u003ca href=\"http:\/\/chicagodist.com\/products\/adafruit-pi-cobbler-plus-kit-breakout-cable-for-raspberry-pi-b\"\u003eWe also have the more compact original Cobbler Plus.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe T-Cobbler Plus is an add on prototyping board from Adafruit specifically designed for the B+ that can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This set will make \"cobbling together\" prototypes with the Pi super easy.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eEach order comes with a \u003c\/span\u003e\u003cspan\u003e40 pin ribbon cable\u003c\/span\u003e\u003cspan\u003e and assembled T-Cobbler Plus. You can plug the 40-pin GPIO cable between the Pi computer and the T-Cobbler breakout. The T-Cobbler can plug into any \u003c\/span\u003e\u003cspan\u003esolderless breadboard\u003c\/span\u003e\u003cspan\u003e. The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNo soldering required!\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe Raspberry Pi, \u003c\/span\u003e\u003cspan\u003esolderless breadboard\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003ebreadboarding wires\u003c\/span\u003e\u003cspan\u003e, cables, components, power supply, etc are not included! We do stock many of those items in the shop, so check those out as well!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse in-md in-lg collapse in\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e73mm x 20mm x 11mm \/ 2.9\" x 0.8\" x 0.4\"\u003c\/li\u003e\n\u003cli\u003eHeight with pins: 19mm \/ 0.8\"\u003c\/li\u003e\n\u003cli\u003eWidth at top of T: 58mm \/ 2.3\"\u003c\/li\u003e\n\u003cli\u003eWeight: 14g\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"\" href=\"https:\/\/github.com\/adafruit\/Adafruit-Pi-Cobber-PCBs\"\u003eEagleCAD PCB files on GitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca target=\"\" href=\"https:\/\/github.com\/adafruit\/Fritzing-Library\/\"\u003eFritzing object in Adafruit Fritzing library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/rohs_icon.jpg\" width=\"100\" height=\"100\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679430339,"sku":"2028","price":11.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2028-00_a4b0f95a-adb1-4c04-a106-bdd75d941530.jpeg?v=1442512332"},{"product_id":"assembled-pi-cobbler-plus-breakout-cable-for-raspberry-pi-b","title":"Assembled Pi Cobbler Plus - Breakout Cable for Raspberry Pi A, B+, Pi 2, Pi 3","description":"\u003cp\u003eThe Raspberry Pi B+ \/ Pi 2 \/ Pi 3 \/ Pi 4 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/1986-adafruit-downgrade-gpio-ribbon-cable-for-pi-a-b-pi-2-pi-3-40p-to-26p\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.adafruit.com\/product\/1986\"\u003edowngrade cable,\u003c\/a\u003e its probably a good time to upgrade your set up and accessorize using all of the Model B+'s \/ Pi 2's \/ Pi 3 \/ Pi 4's 40 pins.\u003cbr\u003e \u003cbr\u003e That's why we now carry the \u003cb\u003eAdafruit Assembled Pi Cobbler Plus - Breakout and Cable for Raspberry Pi A+, B+, Pi 2,\u003c\/b\u003e\u003cb style=\"line-height: 20.8px;\"\u003e Pi 3, and Pi 4.\u003c\/b\u003e It's an add on prototyping Pi Cobbler from Adafruit specifically designed for the B+ and Pi 2 that you can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard. This will make \"cobbling together\" prototypes with the Pi super easy.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eDesigned for use with Raspberry Pi Model A+\/B+\/Pi 2\/Pi 3\/Pi 4 only! No soldering required!\u003c\/b\u003e\u003cbr\u003e \u003cbr\u003e This Cobbler is in a compact shape, which is the least bulky way to wire up. The cable plugs between the Pi A+\/B+\/Pi 2\/Pi 3\/Pi 4 computer and the Cobbler breakout. The Cobbler can plug into any \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=239\"\u003esolderless breadboard\u003c\/a\u003e (or even a prototyping board like the \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=591\"\u003ePermaProto\u003c\/a\u003e). The Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it.\u003cbr\u003e \u003cbr\u003e Please note, this product only contains an assembled Cobbler Plus and \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=1988\"\u003e40-pin ribbon cable\u003c\/a\u003e (in slimming Adafruit Black). \u003ca href=\"https:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi\"\u003eRaspberry Pi B+\u003c\/a\u003e, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=239\"\u003esolderless breadboard\u003c\/a\u003e, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=153\"\u003ebreadboarding wires\u003c\/a\u003e, cables, components, power supply, etc are not included! We do stock many of those items in the shop, so check those out as well!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote: The Raspberry Pi Model A+, Raspberry Pi 2 \u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e, Raspberry Pi 3, and Raspberry Pi 4 \u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003eare also compatible with this product!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-heading-row\"\u003e\n\u003ch2 id=\"tab-technical-details-heading\"\u003eTechnical Details\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e63mm x 20mm x 11mm \/ 2.5\" x 0.8\" x 0.4\"\u003c\/li\u003e\n\u003cli\u003eHeight with pins: 20mm \/ 0.8\"\u003c\/li\u003e\n\u003cli\u003eWeight: 12g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\n\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679431747,"sku":"2029","price":9.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2029-00_db066293-04bc-421b-935a-acbfd5e7f565.jpeg?v=1442512337"},{"product_id":"hdmi-4-pi-7-display-1280x800-720p-ips-hdmi-vga-pal-ntsc","title":"HDMI 4 Pi - 7\" Display 1280x800 (720p) IPS - HDMI\/VGA\/PAL\/NTSC","description":"\u003cspan\u003eYes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI\/VGA display with high-res, high-contrast visibility. The visible display measures only 7\" (17.8cm) diagonal, and the TFT comes in an enclosure with HDMI, VGA and Composite inputs. The display is very easy to use - simply connect the included 12VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports. Voilà, a television display! There's some little buttons on the front that let you enter a menu system for adjusting brightness, color and contrast. It auto-detects which input you have and switches to that one or you can 'select' from the menu which to display. It comes with a basic stand (shown) and there are four 'mounting thread' holes in the back in a 75mmx75mm square and you can use M4 screws to attach it to an enclosure. There's also a \"Camera Mount\" 1\/4-20 hole in the bottom so you can attach it to a camera-ready mount. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/7-display-1280x800-720p-ips-speakers-hdmi-vga-ntsc-pal\"\u003e\u003cb\u003eWe also have a version with built in 3W speakers so you can do a full A\/V setup\u003c\/b\u003e check out that 7\" display with speakers here.\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTo demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC\/PAL output. It will not work with a device that only outputs DVI (without a DVI-\u0026gt;HDMI converter) or SECAM. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFor use with a Raspberry Pi we suggest editing \u003c\/span\u003e\u003cb\u003econfig.txt\u003c\/b\u003e\u003cspan\u003e as in the technical tab. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFor use with a BeagleBone black, we found it works when plugged in, no configuration required. You may need a mouse\/keyboard to keep the Bone display from going into 'sleep mode' \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eA 9V US-prong power adapter is included\u003c\/b\u003e\u003cspan\u003e. The power supply may vary from the one shown in the photo, but it will definitely have a US 2-prong plug and will be a switching supply that can be used with 110-240VAC. We also powered it with 12V and it worked fine, and it might work at 5V.\u003c\/span\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679448387,"sku":"1033","price":279.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/1033-00_f32189c2-764a-4a10-95f5-12909ce37e97.jpeg?v=1442512359"},{"product_id":"flex-cable-for-raspberry-pi-camera-300mm-12","title":"Flex Cable for Raspberry Pi Camera - 300mm \/ 12\"","description":"\u003cp\u003e\u003ca class=\"pishop_product_link\" title='Flex Cable for Raspberry Pi Camera - 300mm \/ 12\"' href=\"https:\/\/www.pishop.ca\/product\/flex-cable-for-raspberry-pi-camera-300mm-12\/\" target=\"_blank\"\u003eView on PiShop.ca (SKU 95)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.\u003cbr\u003e \u003cbr\u003e This cable is 300mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well)\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 class=\"hidden-sm hidden-xs\" id=\"tab_technical-details\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv class=\"panel-collapse collapse in-md in-lg\" id=\"technical-details\"\u003e\n\u003ca name=\"technical-details\" class=\"invizzy-anchor\" id=\"technical-details-anchor\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 300mm x 16mm (12\" x 0.6\")\u003c\/li\u003e\n\u003cli\u003eWeight: 2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679450883,"sku":"1648","price":3.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/1648-00_4e5442a1-7cc6-4319-8061-4162d2af5857.jpeg?v=1442512363"},{"product_id":"raspbian-class-10-16-gb-microsd-card","title":"Raspbian Class 10 microSD Card, 16 GB or 32 GB","description":"\u003cp\u003e\u003cspan\u003eWe start with the fastest SD card you can buy (Class 10), and then we add the latest \u003c\/span\u003e\u003ca href=\"http:\/\/www.raspbian.org\/\" target=\"_blank\" title=\"Raspbian Operating System\" rel=\"noopener noreferrer\"\u003eRaspbian\u003c\/a\u003e\u003cspan\u003e distribution.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWill work with any version of the Raspberry Pi including the new Raspberry Pi 4B!\u003c\/p\u003e","brand":"Elmwood Electronics","offers":[{"title":"16 GB","offer_id":7679555971,"sku":"SD16-Raspbian","price":16.99,"currency_code":"CAD","in_stock":false},{"title":"32 GB","offer_id":14248181563444,"sku":"SD32-Raspbian","price":19.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/SAnDiskMicroSD.jpg?v=1567206942"},{"product_id":"flex-cable-for-raspberry-pi-camera-24-610mm","title":"Flex Cable for Raspberry Pi Camera - 24\" \/ 610mm","description":"\u003cp\u003eThis cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either '\u003ca title=\"Raspberry Pi Camera\" href=\"http:\/\/elmwoodelectronics.ca\/products\/raspberry-pi-camera\"\u003eclassic\u003c\/a\u003e' or '\u003ca title=\"Pi Noir Camera\" href=\"http:\/\/elmwoodelectronics.ca\/products\/raspberry-pi-noir-camera-board-infrared-sensitive-camera\"\u003eNoIR\u003c\/a\u003e' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in. \u003cbr\u003e\u003cbr\u003eThis cable is 24\" \/ 610mm long. Each order comes with one cable, Pi Camera not included (but we have those in the shop as well).\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg \"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 610mm x 16mm (24\" x 0.6\")\u003c\/li\u003e\n\u003cli\u003eWeight: 4.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\" alt=\"\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"24\" Camera Cable","offer_id":7679652931,"sku":"1731","price":4.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/1731_LRG_5e42b4e8-e287-470d-bbb8-39945ffefb07.jpeg?v=1442512765"},{"product_id":"adjustable-pi-camera-mount-from-pimoroni","title":"Adjustable Pi Camera Mount from Pimoroni","description":"\u003cp\u003e\u003ca class=\"pishop_product_link\" title=\"Pimoroni Raspberry Pi Camera Mount (For Pi Camera Module 1 or 2)\" href=\"https:\/\/www.pishop.ca\/product\/raspberry-pi-camera-mount\/\" target=\"_blank\"\u003eView on PiShop.ca (SKU 421)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eA stylish, small, and adjustable mount for your Pi Camera.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAllows four different angles of repose.\u003c\/li\u003e\n\u003cli\u003eFour Screws to secure your camera\u003c\/li\u003e\n\u003cli\u003eMade from lush matte black acryclic\u003c\/li\u003e\n\u003cli\u003e1\/4 inch hole for tripod mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow about some \u003ca title=\"Camera Mount Assembly Instructions\" href=\"http:\/\/shop.pimoroni.com\/blogs\/help\/7987155-assembling-the-camera-mount\"\u003eassembly instructions and useful tips\u003c\/a\u003e?\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Pi Camera Mount","offer_id":7679707459,"sku":"PIM012","price":6.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/Camera_Mount_2_of_3_768x768_c93eb06e-2681-4f85-af29-6c3b9d2455ff.jpg?v=1657136519"},{"product_id":"pi-glow-from-pimoroni","title":"PiGlow LED Add-on for Raspberry Pi","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.pishop.ca\/product\/piglow\/\" target=\"_blank\" title=\"Pimoroni PiGlow\" rel=\"noopener noreferrer\" class=\"pishop_product_link\"\u003e\u003cspan\u003eView on PiShop.ca (SKU 164)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGet visual feedback from your Pi! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe PiGlow is a small add on board for the Raspberry Pi that provides 18 individually controllable LEDs. You can use it for all sorts of things! And of course, it fits inside a Pibow! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThere are tons of things you can do with it:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMood lighting \/ ambiance\u003c\/li\u003e\n\u003cli\u003eShowing current system load\u003c\/li\u003e\n\u003cli\u003eNotify you of events like mentions in tweets or incoming e-mail\u003c\/li\u003e\n\u003cli\u003eFeedback the status of scripts\/daemons running on your Pi\u003c\/li\u003e\n\u003cli\u003eWorks great when VESA mounted to provide a cast against a wall\u003c\/li\u003e\n\u003cli\u003e...and pretty much anything else you can think of!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis board uses the SN3218 8-bit 18-channel PWM chip to drive 18 surface mount LEDs. Communication is done via I2C over the GPIO header with a bus address of 0x54 (Python example code provided). Each LED can be set to a PWM value of between 0 and 255. Comes fully assembled and ready to rock.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e18 LEDs (three each of red, orange, yellow, green, blue, and white)\u003c\/li\u003e\n\u003cli\u003eGreat to provide feedback if you're running your Pi headless\u003c\/li\u003e\n\u003cli\u003ePWM (dimming) control for each channel\u003c\/li\u003e\n\u003cli\u003eFully assembled (no soldering required)\u003c\/li\u003e\n\u003cli\u003ePython code to access and control lighting provided\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/shop.pimoroni.com\/products\/piglow\"\u003eLots of example code for Python, Scratch, WiringPi, etc over at the Pimoroni page\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":7679711811,"sku":"PIM013","price":16.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/piglow4_4a0b4f60-e102-4f98-86eb-a4386f4c9748.jpeg?v=1551456323"},{"product_id":"pitft-mini-kit-320x240-2-8-tft-touchscreen-for-raspberry-pi","title":"PiTFT Mini Kit - 320x240 2.8\" TFT+Touchscreen for Raspberry Pi","description":"\u003cp\u003eIs this not the cutest little display for the Raspberry Pi? It features a 2.8\" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIt's designed to fit nicely onto the Pi 1 Model A or B but also works OK with the Pi Zero, Pi 3, Pi 2 or Pi 1 Model A+ or B+ \u003c\/b\u003e(any Pi with a 2x20 connector) as long as you don't mind the PCB overhangs the USB ports by 5mm, see the photos above. \u003cb\u003eIf you have a modern Pi with a 2x20 connector, you may want to grab a \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2298\" target=\"\"\u003ePiTFT 2.8\" Plus which does not overhang\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there's 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button. See below for the link to get the optional tact switches, they're not included.\u003cbr\u003e\u003cbr\u003eAs of 8\/15\/2014 it comes \u003cstrong\u003efully assembled \u003c\/strong\u003eand ready to plug into your Pi! The photos above also show the optional installed slim tactile buttons. \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=1489\"\u003eThe tactile buttons are not included, but you can pick up a pack of 20 here.\u003c\/a\u003e Some basic soldering is required to install the buttons.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi\"\u003eWe've created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Our tutorial shows you how to install the software, as well as calibrate the touchscreen, show videos, display images such as from your PiCam and more!\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe class=\"ta-insert-video\" src=\"\/\/www.youtube.com\/embed\/-kwvbVM9qM0?start=10\" ta-insert-video=\"\/\/www.youtube.com\/embed\/-kwvbVM9qM0?start=10\" allowfullscreen=\"true\" width=\"560\" height=\"315\" frameborder=\"0\" contenteditable=\"false\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679719491,"sku":"1601","price":45.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/PITFT-1_f1b5bfc9-5b67-42b7-99ba-0740f85ca5a9.jpeg?v=1442512822"},{"product_id":"raspberry-pi-official-8-gb-noobs-sd-card-with-6-operating-systems","title":"Raspberry Pi Official \"NOOBS\" microSD Card with 6 Operating Systems","description":"\u003cp\u003e\u003cspan\u003eNew Out Of the Box Software\u003c\/span\u003e\u003cspan\u003e is an easy operating system installation manager for the Raspberry Pi.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe following operating systems and more are currently included in NOOBS:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/raspbian.org\/\"\u003eRaspbian\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/pidora.ca\/\"\u003ePidora\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/libreelec.tv\/\"\u003eLibreELEC\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/osmc.tv\/\"\u003eOSMC\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.riscosopen.org\/wiki\/documentation\/show\/Welcome%20to%20RISC%20OS%20Pi\"\u003eRISC OS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/archlinuxarm.org\/platforms\/armv6\/raspberry-pi\"\u003eArch Linux\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eShips as a microSD card.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/www.raspberrypi.org\/documentation\/installation\/noobs.md\" target=\"_blank\" title=\"Learn about NOOBS\" rel=\"noopener noreferrer\"\u003eLearn more about NOOBS\u003c\/a\u003e at the Raspberry Pi Foundation website.\u003c\/div\u003e","brand":"Raspberry Pi Foundation","offers":[{"title":"NOOBS 16 GB","offer_id":5113797902373,"sku":"SD16-NOOBS","price":16.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/SAnDiskMicroSD_2048x_1ed92259-33da-4b53-bad1-6639abeb1610.jpg?v=1574183016"},{"product_id":"raspberry-pi-noir-camera-board-infrared-sensitive-camera","title":"Raspberry Pi NoIR Camera Board v2- 8MP Infrared-sensitive Camera","description":"\u003cp\u003eThe NoIR Camera v2 is the official \"night vision\" camera board released by the Raspberry Pi Foundation!\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eRaspberry Pi NoIR Camera Board v2\u003c\/strong\u003e is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images, and also support 1080p30, 720p60, and 640x480p60\/90 video.\u003c\/p\u003e\n\u003cp\u003eIt attaches to the Pi by way of one of the small sockets on the board's upper surface and uses the dedicated CSi interface, designed especially for interfacing to cameras.\u003c\/p\u003e\n\u003cp\u003eThe NoIR Camera has No InfraRed (NoIR) filter on the lens which makes it perfect for doing Infrared photography and taking pictures in low light (twilight) environments.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/raspberry-pi-camera\"\u003eAnd we also have the new 8 megapixel version of the popular classic Raspberry Pi Camera Board!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe upgraded Raspberry Pi NoIR Camera board v2 features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved Resolution \n\u003cul\u003e\n\u003cli\u003e8 megapixel native resolution high quality Sony IMX219 image sensor\u003c\/li\u003e\n\u003cli\u003eCameras are capable of 3280 x 2464 pixel static images \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemaining High Quality \n\u003cul\u003e\n\u003cli\u003eCapture video at 1080p30, 720p60 and 640x480p90 resolutions\u003c\/li\u003e\n\u003cli\u003eAll software is supported within the latest version of Raspbian Operating System\u003c\/li\u003e\n\u003cli\u003eNo Infrared filter making it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions\u003c\/li\u003e\n\u003cli\u003e1.4 µm X 1.4 µm pixel with OmniBSI technology for high performance (high sensitivity, low crosstalk, low noise)\u003c\/li\u003e\n\u003cli\u003eOptical size of 1\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=3055\"\u003eRaspberry Pi\u003c\/a\u003e not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe accompanying cable is \u003cb\u003eNOT\u003c\/b\u003e compatible with Raspberry Pi Zero models. You will need to purchase the \u003ca target=\"_blank\" data-saferedirecturl=\"https:\/\/www.google.com\/url?hl=en\u0026amp;q=https:\/\/www.adafruit.com\/product\/3157\u0026amp;source=gmail\u0026amp;ust=1489515278550000\u0026amp;usg=AFQjCNEATvWZOh4ozVCE0KSnG0ArDVSjCA\" href=\"https:\/\/elmwoodelectronics.ca\/products\/14272\" rel=\"noopener noreferrer\"\u003ePi Zero Camera Cable\u003c\/a\u003e separately for Pi Zero compatibility.\u003c\/p\u003e\n\u003cp\u003eNeed a camera cable longer \/ shorter than 150 mm?  \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=pi+camera+cable\"\u003eCheck out our selection\u003c\/a\u003e of Raspberry Pi camera cables.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg \"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 25mm x 23mm x 9mm \/ 0.98\" x 0.90\" x 0.35\"\u003c\/li\u003e\n\u003cli\u003eWeight (camera board + attached cable): 3.4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAlso known as Adafruit 3100\u003c\/p\u003e","brand":"Raspberry Pi Foundation","offers":[{"title":"Pi Noir Camera Board","offer_id":7679745795,"sku":"3100","price":39.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/3100-01.jpg?v=1567196612"},{"product_id":"usb-audio-adapter-works-with-raspberry-pi","title":"USB Audio Adapter - Works with Raspberry Pi","description":"\u003cp\u003eThe Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better audio for music playback, a USB audio card can greatly improve the sound quality and volume. That's because the on-board audio is generated by a PWM output and is minimally filtered. Don't get us wrong, it's a great thing to have audio on board but this USB audio card will make it even better.\u003cbr\u003e \u003cbr\u003e We like this particular dongle for not being too bulky, you can plug it in without blocking the secondary USB port. \u003ca href=\"http:\/\/learn.adafruit.com\/usb-audio-cards-with-a-raspberry-pi\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIt also works great with a Raspberry Pi once the firmware has been updated on the Pi\u003c\/a\u003e. We've tested it successfully with Raspbian, but we don't have tutorials for any other OS's. Updating the firmware requires Internet access on the Pi and takes about 15 minutes.\u003cbr\u003e \u003cbr\u003e At this time we have a tutorial for setting it up for audio output and line-level audio input.\u003cbr\u003e \u003cbr\u003e This device also works great with Windows machines and should also function for Macs, but we are carrying it specifically for Pi usage.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679862595,"sku":"1475","price":7.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/1475_LRG_dc586ca3-a290-406b-bef4-ac66201e43b2.jpeg?v=1442512972"},{"product_id":"hdmi-to-dvi-cable","title":"HDMI to DVI cable, 6 ft, Perfect for Raspberry Pi","description":"\u003cp\u003eThese HDMI to DVI cables are just what you need to connect a Raspberry Pi or any HDMI device to a DVI monitor!\u003c\/p\u003e\n\u003cul class=\"firstList\"\u003e\n\u003cli\u003eLength: 1.8 meter (6 ft)\u003c\/li\u003e\n\u003cli\u003e3D and 4K Compatible\u003c\/li\u003e\n\u003cli\u003eGold plated connectors\u003c\/li\u003e\n\u003cli\u003e3D and 4K support enables resolutions beyond 1080p\u003c\/li\u003e\n\u003cli\u003eHDMI A to DVI-D Dual Link\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWill NOT work with Pi 4 since it uses microHDMI\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":7679867651,"sku":"C1077","price":16.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/hdmi_to_dvi_499d83c9-20c1-495d-84d8-957ca7dcbc89.jpeg?v=1442512976"},{"product_id":"raspberry-pi-camera","title":"Raspberry Pi Camera V2 8MP","description":"\u003cp\u003eThe \u003cstrong\u003eRaspberry Pi Camera Board v2\u003c\/strong\u003e is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60, and 640x480p90 video.\u003c\/p\u003e\n\u003cp\u003eIt attaches to the Pi by way of one of the small sockets on the board's upper surface and uses the dedicated CSi interface, designed especially for interfacing to cameras.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/raspberry-pi-noir-camera-board-infrared-sensitive-camera\"\u003eAnd we also have the 8 megapixel version of the Raspberry Pi NoIR Camera Board!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe upgraded Raspberry Pi Camera board v2 features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproved Resolution \n\u003cul\u003e\n\u003cli\u003e8 megapixel native resolution high quality Sony IMX219 image sensor\u003c\/li\u003e\n\u003cli\u003eCameras are capable of 3280 x 2464 pixel static images \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRemaining High Quality \n\u003cul\u003e\n\u003cli\u003eCapture video at 1080p30, 720p60 and 640x480p90 resolutions\u003c\/li\u003e\n\u003cli\u003eAll software is supported within the latest version of Raspbian Operating System\u003c\/li\u003e\n\u003cli\u003e1.12 µm X 1.12 µm pixel with OmniBSI technology for high performance (high sensitivity, low crosstalk, low noise)\u003c\/li\u003e\n\u003cli\u003eOptical size of 1\/4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/raspberry-pi-4-model-b\"\u003eRaspberry Pi\u003c\/a\u003e not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe accompanying cable is \u003cb\u003eNOT\u003c\/b\u003e compatible with Raspberry Pi Zero models. You will need to purchase the \u003ca data-saferedirecturl=\"https:\/\/www.google.com\/url?hl=en\u0026amp;q=https:\/\/www.adafruit.com\/product\/3157\u0026amp;source=gmail\u0026amp;ust=1489515278550000\u0026amp;usg=AFQjCNEATvWZOh4ozVCE0KSnG0ArDVSjCA\" href=\"https:\/\/elmwoodelectronics.ca\/products\/14272\" target=\"_blank\"\u003ePi Zero Camera Cable\u003c\/a\u003e separately for Pi Zero compatibility.\u003c\/p\u003e\n\u003cp\u003eNeed a camera cable longer \/ shorter than 150 mm?  \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=pi+camera+cable\"\u003eCheck out our selection\u003c\/a\u003e of Raspberry Pi camera cables.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAlso known as Adafruit 3099 and SparkFun DEV-14028\u003c\/em\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"visible-sm visible-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse in-md in-lg collapse in\"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 25mm x 23mm x 9mm \/ 0.98\" x 0.90\" x 0.35\"\u003c\/li\u003e\n\u003cli\u003eWeight (camera board + attached cable): 3.4g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-12 col-md-1 col-sm-1 col-xs-2\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Raspberry Pi Foundation","offers":[{"title":"Standard Raspberry Pi Camera","offer_id":7679890243,"sku":"C3099","price":39.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/3099-04.jpg?v=1567196610"},{"product_id":"adafruit-rgb-positive-16x2-lcd-keypad-kit-for-raspberry-pi","title":"Adafruit RGB Positive 16x2 LCD+Keypad Kit for Raspberry Pi","description":"\u003cp\u003eThis new Adafruit Pi Plate makes it easy to use an RGB 16x2 Character LCD. We really like the RGB Character LCDs we stock in the shop. (For RGB we have \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=399\"\u003eRGB negative\u003c\/a\u003e and \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=398\"\u003eRGB positive\u003c\/a\u003e.) Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a total of 9 pins. That's nearly all the GPIO available on a Pi!\u003cbr\u003e \u003cbr\u003e With this in mind, we wanted to make it easier for people to get these LCD into their projects so we devised a Pi plate that lets you control \u003cstrong\u003ea 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi!\u003c\/strong\u003e The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eNew, we've updated this Pi plate so the buttons on on the right side, which makes it a little more mechanically stable.\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.\u003cbr\u003e \u003cbr\u003e The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA\/SCL) pins. We have a special xtra-tall 26-pin header so the plate sits above the USB and Ethernet jacks. \u003cstrong\u003eFor Pi Model B+ and Pi 2\u003c\/strong\u003e, the resistors sit right above the new set of USB ports. To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThis product comes as a kit!\u003c\/strong\u003e Included is a high quality PCB and all the components (buttons, header etc). \u003cstrong\u003eA 16x2 Character RGB negative LCD is included!\u003c\/strong\u003e Assembly is easy, even if you've never soldered before and the kit can be completed in 30 minutes. \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\"\u003e Check the product tutorial page for assembly instructions before purchasing\u003c\/a\u003e.\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\"\u003eWe also have some handy Python code to help you easily talk to the LCD and buttons\u003c\/a\u003e. You can also easily query the 5 keypad buttons to get input through the library, so you get extra buttons without using any more pins. The buttons are automatically de-bounced inside the library.\u003cbr\u003e \u003cbr\u003e At this time, the code and plate can control the RGB backlight of our character LCDs by turning each LED on or off. This means you can display the following colors: Red, Yellow, Green, Teal, Blue, Violet, White and all off. There is no support for PWM control of the backlight at this time, so if you need to have more granular control of the RGB backlight to display a larger range of colors, this plate can't do that (the I2C expander does not have PWM output).\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\"\u003eProduct page with tutorials, documentation and assembly information\u003c\/a\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679920771,"sku":"1109","price":32.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/rgb_pos4_667d79a3-01df-487e-9ab4-99b62d1b96b1.jpeg?v=1442513036"},{"product_id":"adafruit-blue-white-16x2-lcd-keypad-kit-for-raspberry-pi","title":"Adafruit Blue\u0026White 16x2 LCD+Keypad Kit for Raspberry Pi","description":"\u003cp\u003eThis new Adafruit Pi Plate makes it easy to use a blue and white 16x2 Character LCD. \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=181\"\u003eWe really like the 16x2 Character LCDs we stock in the shop\u003c\/a\u003e. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 1 to control the backlight for a total of 7 pins. That's nearly all the GPIO available on a Pi!\u003cbr\u003e \u003cbr\u003e With this in mind, Adafruit wanted to make it easier for people to get these LCD into their projects, so they devised a Pi plate that lets you control \u003cstrong\u003ea 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi!\u003c\/strong\u003e The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eNew! They've updated this Pi plate so the buttons are on the right side, which makes it a little more mechanically stable.\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.\u003cbr\u003e \u003cbr\u003e The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA\/SCL) pins. We have a special xtra-tall 26-pin header so the plate sits above the USB and Ethernet jacks. \u003cstrong\u003eFor Pi Model B+ and Pi 2\u003c\/strong\u003e, the resistors sit right above the new set of USB ports. To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThis product comes as a kit!\u003c\/strong\u003e Included is a high quality PCB and all the components (buttons, header etc). \u003cstrong\u003eA 16x2 Character blue\u0026amp;white monochrome LCD is included!\u003c\/strong\u003e Assembly is easy, even if you've never soldered before and the kit can be completed in 30 minutes. \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\"\u003e Check the product tutorial page for assembly instructions before purchasing\u003c\/a\u003e You may get a 2-row or 1-row connector LCD, either will work fine.\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\"\u003eWe also have some handy Python code to help you easily talk to the LCD and buttons\u003c\/a\u003e You can also easily query the 5 keypad buttons to get input through the library, so you get extra buttons without using any more pins. The buttons are automatically de-bounced inside the library.\u003cbr\u003e \u003cbr\u003e At this time, the code and plate can control the white backlight on or off. There is no support for PWM control of the backlight at this time, so if you need to have more granular control of the backlight, this plate can't do that (the I2C expander does not have PWM output).\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\"\u003eProduct page with tutorials, documentation and assembly information\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 id=\"pac-h1-technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 2.2\" x 3.35\"\u003c\/li\u003e\n\u003cli\u003eComes with a 16x2 Blue \u0026amp; White LCD\u003c\/li\u003e\n\u003cli\u003ePlug and play with any Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eUses only the I2C (SDA\/SCL) pins\u003c\/li\u003e\n\u003cli\u003eThis board\/chip uses I2C 7-bit address 0x20.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\/download\"\u003ePCB files, schematic, and Fritzing available in the product tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679923011,"sku":"1115","price":25.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/blueandwhiteLCDkit1_1d0bd211-52b7-4154-85f0-cd01fdc7dc34.jpeg?v=1442513038"},{"product_id":"adafruit-rgb-negative-16x2-lcd-keypad-kit-for-raspberry-pi","title":"Adafruit RGB Negative 16x2 LCD+Keypad Kit for Raspberry Pi","description":"\u003cp\u003eThis new Adafruit Pi Plate makes it easy to use an RGB 16x2 Character LCD. We really like the RGB Character LCDs we stock in the shop. (For RGB we have \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=399\"\u003eRGB negative\u003c\/a\u003e and \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=398\"\u003eRGB positive\u003c\/a\u003e.) Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a total of 9 pins. That's nearly all the GPIO available on a Pi!\u003cbr\u003e \u003cbr\u003e With this in mind, we wanted to make it easier for people to get these LCD into their projects so we devised a Pi plate that lets you control \u003cstrong\u003ea 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi!\u003c\/strong\u003e The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eNew, we've updated this Pi plate so the buttons on on the right side, which makes it a little more mechanically stable.\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e This pi plate is perfect for when you want to build a stand-alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.\u003cbr\u003e \u003cbr\u003e The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA\/SCL) pins. We have a special xtra-tall 26-pin header so the plate sits above the USB and Ethernet jacks. \u003cstrong\u003eFor Pi Model B+ and Pi 2\u003c\/strong\u003e, the resistors sit right above the new set of USB ports. To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eThis product comes as a kit!\u003c\/strong\u003e Included is a high quality PCB and all the components (buttons, header etc). \u003cstrong\u003eA 16x2 Character RGB negative LCD is included!\u003c\/strong\u003e Assembly is easy, even if you've never soldered before and the kit can be completed in 30 minutes. \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\"\u003e Check the product tutorial page for assembly instructions before purchasing\u003c\/a\u003e.\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\"\u003eWe also have some handy Python code to help you easily talk to the LCD and buttons\u003c\/a\u003e. You can also easily query the 5 keypad buttons to get input through the library, so you get extra buttons without using any more pins. The buttons are automatically de-bounced inside the library.\u003cbr\u003e \u003cbr\u003e At this time, the code and plate can control the RGB backlight of our character LCDs by turning each LED on or off. This means you can display the following colors: Red, Yellow, Green, Teal, Blue, Violet, White and all off. There is no support for PWM control of the backlight at this time, so if you need to have more granular control of the RGB backlight to display a larger range of colors, this plate can't do that (the I2C expander does not have PWM output).\u003cbr\u003e \u003cbr\u003e \u003ca href=\"http:\/\/learn.adafruit.com\/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi\"\u003eProduct page with tutorials, documentation and assembly information\u003c\/a\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679925123,"sku":"1110","price":32.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/RGB_Neg_LCDandKeypad2_6210c3a2-8094-4b37-b1b7-68a9ae55e0c7.jpeg?v=1442513041"},{"product_id":"adafruit-pi-dish-for-raspberry-pi-includes-breadboard","title":"Adafruit Pi Dish for Raspberry Pi - Includes Breadboard","description":"\u003cp\u003eBy popular demand! We now have a way to attach a Raspberry Pi computer to a plastic 'dish' with a full-sized breadboard. We designed it carefully to make it as easy as possible to attach and detach the Pi. There are two ways to mount the Pi on to the plate, so you can flip it around for your convenience. Next to the Pi is a spot for a full sized breadboard, plenty of space for your project even if you're using an Adafruit Cobbler breakout helper. We also include 4 rubber bumpers to attach to the bottom\u003cbr\u003e\r\r\u003cbr\u003e\r\r\u003cb\u003eComes with: Laser cut acrylic plate, mounting screws+nuts for Pi Model A, B rev 2, or B+, four bumpers and a breadboard. The Pi computer, cables, wires, and any other components shown for demonstration are not included!\u003c\/b\u003e\u003c\/p\u003e\r\r\r\r\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e As of August 7th, 2014 we have updated the Pi Dish to work with Raspberry Pi A, B rev 2, and B+! It no longer includes a board edge mounting kit for Model B rev 1. If you want to use this kit with the Model B rev 1 please pick up a board edge mounting kit. \u003ca href=\"https:\/\/www.adafruit.com\/product\/1116\"\u003eThe board edge mounting kit can be purchased here.\u003c\/a\u003e\u003cbr\u003e\r\r\u003cbr\u003e\r\r\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/DYjajwRhGDA?start=1199\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":7679935683,"sku":"942","price":22.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/pi_dish4_79067a77-e416-4c06-9557-44df09d1256d.jpeg?v=1442513051"},{"product_id":"pitft-plus-320x240-3-2-tft-resistive-touchscreen","title":"PiTFT Plus 320x240 3.2\" TFT + Resistive Touchscreen","description":"\u003cp\u003eIs this not the cutest little display for the Raspberry Pi? It features a 3.2\" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A+, B+!\u003c\/b\u003e (Any Pi with a 2x20 connector) \u003cb\u003eNot for use with an old Pi 1 with 2x13 connector\u003c\/b\u003e. This display is functionally the same as our \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/pitft-mini-kit-320x240-2-8-tft-touchscreen-for-raspberry-pi\"\u003eclassic PiTFT 2.8\"\u003c\/a\u003e and \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/pitft-plus-assembled-320x240-2-8-tft-resistive-touchscreen\"\u003ePiTFT Plus 2.8\"\u003c\/a\u003e - same pins used, same resolution, same drivers, but is just a bit bigger. It also has a 26- pins GPIO pins brought out so you can connect a 26-pin Raspberry Pi GPIO cable underneath. It's the same outline as a Pi 3 \/ 2 \/ B+ so it fits well on top of a Pi in our Raspberry Pi Enclosure base.\u003c\/p\u003e\n\u003cp\u003eThe display and touchscreen uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there's 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on\/off button. See below for the link to get the optional tact switches, they're not included.\u003c\/p\u003e\n\u003cp\u003eUse it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi computer and enclosure not included! \u003c\/strong\u003eThis display comes fully assembled, just plug it onto  your Raspberry Pi and install our software to rock out.\u003cstrong\u003e \u003c\/strong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi\"\u003eCheck out our detailed tutorial on how to play videos, display images, and otherwise customize your PiTFT (the tutorial is identical to the 2.8\" PiTFT)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe class=\"ta-insert-video\" src=\"\/\/www.youtube.com\/embed\/cHSlleGa1oo?start=889\" ta-insert-video=\"\/\/www.youtube.com\/embed\/cHSlleGa1oo?start=889\" allowfullscreen=\"true\" width=\"560\" height=\"315\" frameborder=\"0\" contenteditable=\"false\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14531452867,"sku":"2616","price":52.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2616-00.jpg?v=1459135098"},{"product_id":"pitft-plus-480x320-3-5-tft-touchscreen-for-raspberry-pi-pi-2-and-model-a-b","title":"PiTFT Plus 480x320 3.5\" TFT+Touchscreen for Raspberry Pi - Pi 2 and Model A+ \/ B+","description":"\u003cp\u003eIs this not the cutest, little display for the Raspberry Pi? It features a \u003cstrong\u003e3.5\" display with 480x320\u003c\/strong\u003e 16-bit color pixels and a resistive touch overlay, and is engineered specifically to work with the \"2x20 connector\" Raspberry Pi's. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis PiTFT 3.5\" is designed to fit nicely onto the Raspberry Pi Zero, Pi 4, Pi 3, Pi 2 or Model A+ \/ B+ \u003c\/strong\u003e(any Pi with a 2x20 connector)\u003cstrong\u003e. Not for use with an old Pi 1 with 2x13 connector\u003c\/strong\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/pitft-2-8-tft-320x240-capacitive-touchscreen-for-raspberry-pi\"\u003e If you'd like to use a 2.8\" display with the original Pi A or Pi B, check out this version. OR a 3.5\" can be pre-ordered by request. \u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. GPIO #18 can be used to PWM dim the backlight if you like. All other GPIO are unused. There's a 2x16 'classic Pi' connection GPIO header on the bottom, you can connect a 26-pin Pi GPIO cable to it to use any of the other pins as you like. The other GPIO are broken out into solder pads at the bottom, in case you want to use more of the GPIO.\u003cbr\u003e\u003cbr\u003eBest of all, it comes fully assembled\u003cstrong\u003e \u003c\/strong\u003eand ready to plug into your Pi! You can use this as a display for running the X interface, or pygame. You can also have an HDMI display seperately connected. There's four mounting ears that can be used to attach the display \u0026amp; Pi to a bezel, or snap them off with pliers (they're perforated) for a slick exactly-the-same-size-as-a-Pi look.\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit's created a custom kernel package based of off Notro's awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. This tutorial shows you how to install the software, as well as calibrate the touchscreen, display images such as from your PiCam and more!\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 id=\"tab_technical-details\" class=\"hidden-sm hidden-xs\"\u003eTECHNICAL DETAILS\u003c\/h3\u003e\n\u003cdiv id=\"technical-details\" class=\"panel-collapse collapse in-md in-lg \"\u003e\n\u003ca id=\"technical-details-anchor\" class=\"invizzy-anchor\" name=\"technical-details\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay current draw is mostly based on the backlight, with full-on backlight the current draw is ~100mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi\/downloads\"\u003eDatasheets, schematic, GitHub PCB files, and the latest kernel fork available in the product tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14531688195,"sku":"2441","price":59.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2441-06.jpeg?v=1452781585"},{"product_id":"pimoroni-piano-hat","title":"Pimoroni Piano HAT","description":"\u003carticle class=\"description\" notranslate=\"\"\u003e\n\u003carticle class=\"description\" notranslate=\"\"\u003e\n\u003ch3\u003eUnlock your inner Mozart with Piano HAT, the ultimate mini musical companion for your Raspberry Pi!\u003c\/h3\u003e\n\u003cp\u003ePiano HAT is inspired by Zachary Igielman's PiPiano and made with his blessing. We've taken his fabulous idea for a dinky piano add-on for the Raspberry Pi, made it touch-sensitive and added barrels of our trademark Pimoroni polish.\u003c\/p\u003e\n\u003cblockquote\u003e\"The Piano HAT is, as far as electronics goes, a work of art. It looks slick, feels slick and, with the software library included, acts slick.\" \u003cbr\u003e\u003cbr\u003e- \u003ca href=\"http:\/\/www.recantha.co.uk\/blog\/?p=13187\"\u003eMichael Horne\u003c\/a\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003eUse it to play music in Python, control software synths on your Pi, take control of hardware synthesizers, or surprise us with your creativity!\u003c\/p\u003e\n\u003cp\u003ePiano HAT is compatible with Raspberry Pi 2, B+ and A+ and comes fully assembled, with a trove of examples to get you started.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16 touch sensitive buttons\u003c\/li\u003e\n\u003cli\u003e13 piano keys (a full octave)\u003c\/li\u003e\n\u003cli\u003eOctave up\/down buttons\u003c\/li\u003e\n\u003cli\u003eInstrument cycle button (great for use with synthesizers)\u003c\/li\u003e\n\u003cli\u003e16 LEDs (let them light automatically, or take control with Python)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e16 touch sensitive buttons\u003c\/strong\u003e - Each button on Piano HAT can be individually watched in Python and hooked up to whatever mad-cap contraption or project you can imagine. Tickle-the-ivories and create a symphony of servos or a concerto of... motors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOctave up\/octave down buttons\u003c\/strong\u003e - Expand your playing horizons with two dedicated buttons you can use to shift up or down an octave, or - you know- raise and lower the drawbridge to your fortress.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstrument Cycle Button\u003c\/strong\u003e - Synth heads will be pleased to hear that it's totally possible to make this button send a patch change event to synths like Yoshimi. All you need is a little Python glue!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e16 LEDs\u003c\/strong\u003e - Ever seen on one of those learn-to-play keyboards with light-up keys? Take command of the LEDs and walk yourself through your favorite tunes, or use them as a visual metronome.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSuch sounds, very wow\u003c\/strong\u003e - Use with a variety of synths, both hardware and software, play .wav samples with PyGame, or create your own Piano-controlled contraptions. We've included a MIDI example which lets you play music with \u003ca href=\"http:\/\/www.warmplace.ru\/soft\/sunvox\/\"\u003eSunvox,\u003c\/a\u003e Yoshimi and others, plus a PyGame example that includes a few octaves of glorious piano and some drums for good measure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHey Pros!\u003c\/strong\u003e - Using Python you can make Piano HAT output regular MIDI commands via a USB to MIDI adapter and take control of your hardware synth gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Python library, documentation and examples\u003c\/strong\u003e - Head on over to our Piano HAT GitHub repository to find a Python library, examples for PyGame and Python MIDI and more: \u003ca href=\"https:\/\/github.com\/pimoroni\/piano-hat\"\u003ehttps:\/\/github.com\/pimoroni\/piano-hat\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAs seen in MagPi\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.raspberrypi.org\/magpi\/issues\/38\/\"\u003eIssue 38 - Make music with the Piano HAT by Richard Hayler\u003c\/a\u003e, \u003ca href=\"https:\/\/www.raspberrypi.org\/magpi\/issues\/37\/\"\u003eIssue 37 - Piano HAT review by Les Pounder\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/article\u003e\n\u003c\/article\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":14531744195,"sku":"PIM095","price":18.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/Piano_HAT_4_of_4_1024x1024_c65c5ed1-6b92-423e-aff7-255731144b37.JPG?v=1459135474"},{"product_id":"pimoroni-explorer-hat-pro","title":"Pimoroni Explorer HAT Pro","description":"\u003cp\u003e\u003ca title=\"Pimoroni Explorer HAT Pro for Raspberry Pi\" href=\"https:\/\/www.pishop.ca\/product\/pimoroni-explorer-hat-pro-for-raspberry-pi\/\" class=\"pishop_product_link\" target=\"_blank\"\u003eView on PiShop.ca (SKU 74)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eThe Explorer HAT Pro is the perfect prototyping side-kick for your Raspberry Pi!\u003c\/h3\u003e\n\u003cp\u003ePimoroni added a heap of useful input and output options that will take your projects to the next level. Great for driving motors, using analog sensors, interfacing with 5V systems, and touch (even fruit based!) interfaces.\u003c\/p\u003e\n\u003cp\u003eIt's compatible with Raspberry Pi 3, 2, B+, and A+ and comes fully assembled.\u003c\/p\u003e\n\u003cp\u003eExplorer HAT Pro Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFour buffered 5V tolerant inputs\u003c\/li\u003e\n\u003cli\u003eFour powered 5V outputs (up to 500mA!)\u003c\/li\u003e\n\u003cli\u003eFour capacitive touch pads\u003c\/li\u003e\n\u003cli\u003eFour capacitive crocodile clip pads\u003c\/li\u003e\n\u003cli\u003eFour coloured LEDs\u003c\/li\u003e\n\u003cli\u003eFour analog inputs\u003c\/li\u003e\n\u003cli\u003eTwo H-bridge motor drivers\u003c\/li\u003e\n\u003cli\u003eA heap of useful (unprotected) 3v3 goodies from the GPIO\u003c\/li\u003e\n\u003cli\u003eA mini breadboard on top!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e5V tolerant inputs\u003c\/strong\u003e - Hook up your Pi to accept input from 5V systems (like Arduino Uno\/Leonardo or 5V Trinkets). We've used a 5-channel buffer that will accept anything from 2V-5V as logic high.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5V powered ouputs\u003c\/strong\u003e - The onboard darlington array can supply up to 500mA per channel (but you'll be limited to driving around 1A total from the board). Ideal for stepper motors, solenoids, and relays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEight capacitive inputs\u003c\/strong\u003e - Four along the front edge for touch input (labelled 1, 2, 3, 4) and four up the side for attaching crocodile clips to objects (such as fruit, or tin foil) for experimentation!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour coloured LEDs\u003c\/strong\u003e - Independently controllable LEDs (red, green, blue, and yellow) that make great status indicators.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFour analog inputs \u003c\/strong\u003e- A tidy way to integrate analog signals into your project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo H-Bridge motor drivers \u003c\/strong\u003e- Drive two 5V motors bidirectionally with up to 200mA per channel. Ideal with our micro-metal gear-motors to create the perfect little buggy! You can even soft-PWM for full speed control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Python library, documentation and examples \u003c\/strong\u003e- Head on over to our GitHub to find a Python library, examples, documentation and a brief introduction to Explorer HAT: \u003ca href=\"https:\/\/github.com\/pimoroni\/explorer-hat\"\u003ehttps:\/\/github.com\/pimoroni\/explorer-hat\u003c\/a\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":14531757059,"sku":"PIM082","price":23.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/PIM082-1.png?v=1452781677"},{"product_id":"rasclock-rtc-for-raspberry-pi","title":"RasClock RTC for Raspberry Pi","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca class=\"pishop_product_link\" href=\"https:\/\/www.pishop.ca\/product\/rasclock-raspberry-pi-real-time-clock-module\/\" target=\"_blank\" title=\"RasClock - Raspberry Pi Real Time Clock Module\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eView on PiShop.ca (SKU 277)\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRasClock is a highly accurate real-time clock (RTC) that fits on a Raspberry Pi and includes a battery backup. Battery is not included.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery accurate timekeeping\u003c\/strong\u003e (typically ±3ppm or \u0026lt;2 minutes deviation per year).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated crystal\u003c\/strong\u003e that compensates for temperature and age.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe module is installed directly into the GPIO header at the corner of the Raspberry Pi. It uses the 3.3V, GND SDA and SCL pins. The module stays within the outline of the Raspberry Pi and sits lower than video output so it should fit within most cases.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eA 36mA 3V CR1220 battery will keep \u003c\/span\u003e\u003cstrong\u003ethe time for around two years\u003c\/strong\u003e\u003cspan\u003e if the device isn't used and considerably longer if it is.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor setup and detailed instructions, visit the \u003ca href=\"https:\/\/afterthoughtsoftware.com\/products\/rasclock\" title=\"RasClock Setup\"\u003eRasClock website\u003c\/a\u003e.\u003c\/p\u003e","brand":"Afterthought Software","offers":[{"title":"Default Title","offer_id":14531758851,"sku":"5400","price":15.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/RASPPI-RASCLOCK-1-800x533-300x300.jpg?v=1459127203"},{"product_id":"break-away-0-1-2x20-pin-strip-dual-male-header","title":"Break-away 0.1\" 2x20-pin Strip Dual Male Header","description":"\u003cp\u003eIf we could eat headers, we'd have them for breakfast, lunch, and dinner.  But we can't :( So we're making the best of it and selling them!\u003c\/p\u003e\n\u003cp\u003eThis \u003cstrong\u003e2x20-pin strip male header \u003c\/strong\u003eis a great way to add pins to 2x20 0.1\" holes in a PCB.  They're also perfect companion piece to our \u003ca href=\"https:\/\/elmwoodelectronics.ca\/products\/2823-adafruit-0-1-2x20-pin-strip-right-angle-female-header\"\u003e2x20-pin right-angle female header\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/gXzxI_ey5lU%0D%0D?start=247\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14531759171,"sku":"2822","price":2.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2822-00.jpg?v=1459134420"},{"product_id":"faceplate-and-buttons-pack-for-2-4-pitft-hat-raspberry-pi-a","title":"Faceplate and Buttons Pack for 2.4\" PiTFT HAT - Raspberry Pi A+","description":"\u003cp\u003eComplete your Pi setup with our custom designed faceplate specifically designed to fit your \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2455\"\u003e2.4\" PiTFT HAT\u003c\/a\u003e and Adafruit Pi A+  case base! This \u003cstrong\u003eFaceplate and Buttons Pack\u003c\/strong\u003e is a simple way to enclose your 2.4\" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top' of an Adafruit Pi case, with a sleek black bezel and button pads.\u003c\/p\u003e\n\u003cp\u003eThis pack works with the \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2266\"\u003eRaspberry Pi Model A+\u003c\/a\u003e, and \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2455\"\u003e2.4\" PiTFT HAT only\u003c\/a\u003e!  \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2807\"\u003eWe also have a Faceplate and Buttons Pack for the Raspberry Pi B+ \/ Pi 2.\u003c\/a\u003eif you would like to make a setup with your Pi 2 or B+\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou'll also need to get a \"base\" that this snaps into\u003c\/strong\u003e. We have them in all sorts of colors, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2401\"\u003echeck out the complete line of our Pi Model A+ Case Bases here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003eScreen, Case Base and Raspberry Pi not included\u003cstrong\u003e - \u003c\/strong\u003ethis is the \u003cstrong\u003eFaceplate and Buttons only. This is compatible with the \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2266\"\u003ePi Model A+\u003c\/a\u003e and only our \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2455\"\u003e2.4\" PiTFT HAT\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-heading-row\"\u003e\n\u003ch2 id=\"tab-technical-details-heading\"\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e64.7mm x 72.7mm x 4.9mm \/ 2.55\" x 2.86\" x 0.19\"\u003c\/li\u003e\n\u003cli\u003eWeight (just the faceplate): 8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/ROHS2011_480x480.png?v=1632326552\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/ROHS2011_480x480.png?v=1632326552\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/ROHS2015_480x480.png?v=1632326562\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/ROHS2015_480x480.png?v=1632326562\"\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14531768195,"sku":"2808","price":7.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2808-00.jpeg?v=1452781695"},{"product_id":"faceplate-and-buttons-pack-for-2-8-pitfts-raspberry-pi-b-pi-2","title":"Faceplate and Buttons Pack for 2.8\" PiTFTs - Raspberry Pi B+ \/ Pi 2","description":"\u003cp\u003eComplete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8\" PiTFT and Adafruit Pi B+ \/ Pi 2 case base! This \u003cstrong\u003eFaceplate and Buttons Pack\u003c\/strong\u003e is a simple way to enclose your 2.8\" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top' of an Adafruit Pi case, with a sleek black bezel and button pads.\u003c\/p\u003e\n\u003cp\u003eThis pack works with the Raspberry Pi Model B+ \/ Pi 2 \/ Pi 3, and 2.8\" \u003cstrong\u003ePiTFT Plus\u003c\/strong\u003e only! It will fit both the \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2298\"\u003eResistive\u003c\/a\u003e and the \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2423\"\u003eCapacitive\u003c\/a\u003e screens. \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2808\"\u003eWe also have a PiTFT Faceplate and Buttons Pack for the Raspberry Pi A+ and 2.4\" PiTFT\u003c\/a\u003e if you would like to make an even \u003cem\u003ecuter \u003c\/em\u003e setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou'll also need to get a \"base\" that this snaps into\u003c\/strong\u003e. We have them in all sorts of colors, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2285\"\u003echeck out the complete line of our Pi Model B+ \/ Pi 2 \/ Pi 3 Case Bases here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003eScreen, Case Base and Raspberry Pi not included\u003cstrong\u003e - \u003c\/strong\u003ethis is the \u003cstrong\u003eFaceplate and Buttons only. This is compatible with the \u003ca href=\"https:\/\/www.adafruit.com\/product\/2358\"\u003ePi 2 Model B\u003c\/a\u003e, \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=3055\"\u003ePi 3\u003c\/a\u003e,\u003c\/strong\u003e\u003cstrong\u003e \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=1914\"\u003eModel B+\u003c\/a\u003e and only our 2.8\" PiTFT Plus's - both \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2298\"\u003eresistive\u003c\/a\u003e and \u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2423\"\u003ecapacitive\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-heading-row\"\u003e\n\u003ch2 id=\"tab-technical-details-heading\"\u003eTechnical Details\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-collapse collapse in\" id=\"tab-technical-details-content\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-lg-12 col-md-12 col-sm-12 col-xs-12\"\u003e\n\u003cul\u003e\n\u003cli\u003e65.1mm x 92.7mm x 6.6mm \/ 2.56\" x 3.65\" x 0.26\"\u003c\/li\u003e\n\u003cli\u003eWeight (just the faceplate): 10.5g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2011_65_EU_480x480.png?v=1573663164\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/files\/RoHS2_2015_863_EU_480x480.png?v=1573663150\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":14531779971,"sku":"2807","price":7.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2807-9.jpeg?v=1452781711"},{"product_id":"adafruit-flex-cable-for-raspberry-pi-camera-2-meters-ada2144","title":"Adafruit Flex Cable for Raspberry Pi Camera - 2 meters [ADA2144]","description":"\u003cp\u003eThis cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.\u003c\/p\u003e\r\r\r\r\u003cp\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003eThis cable is 2 meters long. We have cables in \u003c\/span\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=2087\" style=\"line-height: 20.7999992370605px;\"\u003ea ton of sizes\u003c\/a\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003e so you can have the perfect fit. Each order comes with one cable, \u003c\/span\u003e\u003ca href=\"https:\/\/elmwoodelectronics.ca\/search?q=1367\" style=\"line-height: 20.7999992370605px;\"\u003ePi Camera\u003c\/a\u003e\u003cspan style=\"line-height: 20.7999992370605px;\"\u003e not included (but we have those in the shop as well)\u003c\/span\u003e\u003c\/p\u003e\r\r\r\r\u003cp\u003e\u003cstrong\u003ePlease note, \u003c\/strong\u003ewe did test this length cable with our Pi Model B\/B+ and a Pi Camera and it worked great but 2 meters is \u003cem\u003ereally\u003c\/em\u003e long for this kind of camera protocol, so if you have a very electrically noisy environment (inside a tesla coil?) you may have corrupted images.\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":17466357123,"sku":"2144","price":8.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/products\/2144-00.jpg?v=1457833887"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/1182\/collections\/raspberry.jpg?v=1447967671","url":"https:\/\/elmwoodelectronics.ca\/collections\/raspberry-pi\/power-supply.oembed","provider":"Elmwood Electronics","version":"1.0","type":"link"}